GE / IP FANUC Series 90/30 In Stock
SKU 2170305 UPC 0146421470395
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The IC698PSD300 is a Multi-Purpose High Capacity 24 VDC, 300 Watt Power Supply manufactured by GE Fanuc for series RX7i. It provides a maximum output of up to 300 watts, operates from 18 to 30 VDC, and requires forced air cooling.
This power supply module offers a logic level of sequencing signals to the RX7i backplane modules. It also offers protection against overvoltage fault conditions, overcurrent, and overtemperature.
Provision of cool air is facilitated by a powerful tray fan that forces air into the power supply’s engine. This fan is mounted at the bottom of the rack. The IC698PSD300 also has an airflow sensor that detects fan failure or air blockage. If the power supply senses any interruption in air flow, it responds by switching off all outputs and turning on the over temperature LED indicator (RED). The power supply automatically recovers from this condition when the internal temperature decreases to operating levels.
The IC698PSD300 module’s three LEDs work together with the airflow sensor. The green OUTPUT OK indicates that all the three DC output channels are operating within the specified range. It only turns OFF if one of the three DC output channels has failed. The red OVER TEMP LED will alert the user if the critical supply temperature exceeds its limit or if the airflow sensor detects interruption of air flow.
Important warning: Do not insert or remove modules when the power supply or any externally-connected power sources are on. Hazardous voltages could exist resulting in personal injury, module damage, or unexpected operation of the device or process.
|Nominal Rated Voltage:||24 VDC|
|Input Voltage Range:||18 to 30 VDC|
|Input Power:||430 W|
|Output Voltages:||+ 5 VDC, +12 VDC or -12VDC|
|Module Type:||Power Supply|
|Rack Location:||Slot 0 (Leftmost slot)|
Part Number: IC698PSD300 / ic698psd300
Mfr/Brand Name: GE Automation
Mfr Number: IC698PSD300 / ic698psd300
Type: 300 Watts, 24 volt DC Power Supply Module
PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.