GE / IP FANUC Series 90/30 In Stock
SKU 2170305 UPC 0146421470395
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The IC698PSD300 is a Multi-Purpose High Capacity 24 VDC, 300 Watt Power Supply manufactured by GE Fanuc for series RX7i. It provides a maximum output of up to 300 watts, operates from 18 to 30 VDC, and requires forced air cooling.
This power supply module offers a logic level of sequencing signals to the RX7i backplane modules. It also offers protection against overvoltage fault conditions, overcurrent, and overtemperature.
Provision of cool air is facilitated by a powerful tray fan that forces air into the power supply’s engine. This fan is mounted at the bottom of the rack. The IC698PSD300 also has an airflow sensor that detects fan failure or air blockage. If the power supply senses any interruption in air flow, it responds by switching off all outputs and turning on the over temperature LED indicator (RED). The power supply automatically recovers from this condition when the internal temperature decreases to operating levels.
The IC698PSD300 module’s three LEDs work together with the airflow sensor. The green OUTPUT OK indicates that all the three DC output channels are operating within the specified range. It only turns OFF if one of the three DC output channels has failed. The red OVER TEMP LED will alert the user if the critical supply temperature exceeds its limit or if the airflow sensor detects interruption of air flow.
Important warning: Do not insert or remove modules when the power supply or any externally-connected power sources are on. Hazardous voltages could exist resulting in personal injury, module damage, or unexpected operation of the device or process.
|Nominal Rated Voltage:||24 VDC|
|Input Voltage Range:||18 to 30 VDC|
|Input Power:||430 W|
|Output Voltages:||+ 5 VDC, +12 VDC or -12VDC|
|Module Type:||Power Supply|
|Rack Location:||Slot 0 (Leftmost slot)|
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.