1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.4/5 Based on 9 ratings.

Rate your purchase of the 1794-AENTRXT

SKU 0  UPC 00


Technical Specifications for 1794-AENTRXT

BrandAllen-Bradley / Rockwell Automation
SeriesFlex I/O
Part number1794-AENTRXT
Voltage24 Volts DC
Maximum module capacity8
Communication protocolEtherNet/IP
Power dissipation6.1 Watts at 19.2 Volts DC
MountingDIN rail
I/O configurationRSLogix 5000
Supported modesHalf/full duplex 10-megabit/100-megabit operation
Firmware version1.xx or higher
Status indicatorsModule status, Network status and Link status for both links
Dimensions (HxWxD)87.4 x 94 x 92 millimeters (3.4 x 3.7 x 3.6 inches)

The 1794-AENTRXT dual port EtherNet/IP adapter module by Allen-Bradley/Rockwell Automation is part of the FLEX I/O series and it has a communication rate of 10/100 megabits per second. The module has an input voltage of 24 Volts DC and an isolation voltage of 50 Volts continuous. The module dissipates power at a rate of 6.1 Watts and it uses a DIN rail for mounting.

The 1794-AENTRXT adapter module is a Series A component that is manufactured by Allen-Bradley/Rockwell Automation. This I/O EtherNet/IP adapter module has dual ports and it is available through the FLEX I/O series. The module has several status indicators and parts like a locking tab, connectors for Flexbus and RJ45 connections, switches for the IP address, and power connections. The 1794-AENTRXT module is intended for mounting on a DIN rail and it has the following dimensions (HxWxD): 87.4 x 94 x 92 millimeters (3.4 x 3.7 x 3.6 inches). The specified power wiring cable length for the module is 10 meters (32.8 feet) maximum. The status indicators on the module show when the I/O is being transmitted or received at the speed of 100 megabits or 10 megabits. Additionally, the status indicators show if links exist. 

The module status indicators indicate if the correct power is supplied to the 1794-AENTRXT adapter module and if the adapter is properly configured. Besides that, the 1794-AENTRXT module has an indicator for the status of the network which checks everything related to the IP address. The indicators will either be flashing or glowing in a solid state and they will glow or flash green, yellow, or red light, depending on the status of the module. The 1794-AENTRXT adapter module has an 8-module host capacity and a communication rate of 10/100 megabits per second. The module has an open enclosure and a nominal input voltage of 24 Volts DC. The inrush current of the 1794-AENTRXT module is 18 Amps for 2 milliseconds and the maximum Flexbus output current is 640 milliamps at 5 Volts DC. The isolation voltage of the unit is 50 Volts (continuous).

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.
All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.