GE / IP FANUC Series 90/30 In Stock
SKU 2173004 UPC 0799705792890
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The "CA" Revision is for the PDF Supply Conformal Coating Service. PDF Supply warranty will apply. A $150 service charge will be added at checkout.
IC693APU300 is a high speed single slot counter belonging to the 90-30 series of PLCs. The module can be used where pulse input rates are greater than the PLCs input capability or where a significant percentage of the PLC’s processing capability is required.
The high-speed counter allows direct processing of rapid pulse signals of up to 1 MHz for industrial applications such as material handling, meter proving and velocity measurement. With the direct processing capability, the high-speed counter can detect inputs, count and respond with outputs without the need of communicating with a CPU. It’s configurable to count either up or down, both up and down or to count the difference existing between two variables. The module can be configured to provide either 1 complex counter, 2 identical and complex counters, or 4 identical and independent simple counters. The module comes with 12 positive source inputs with an input voltage range of either 5 V DV or 10 to 30 V DC. Furthermore, you’ll find 4 positive source outputs, internal module diagnostics, and a removable terminal board used during field wiring. The IC694APU300 module provides two modes of operation when used in an RX3i system: Classic and Enhanced. By default, the module operates in classic mode. However, if you desire to use enhanced features, select ‘Enhanced mode’ using the machine edition configuration tool.
Enhanced features include Support for up to 1 MHz input frequency from external devices and up to 2 MHz internal oscillator at clock input 1, support for both 32-bit counters and Z input events, configurable outputs, rollover detection flag and support for firmware updates over the backplane from the RX3i CPU. IC693APU300 also has a windowing feature that allows a user to define a range of counter accumulator values where the strobe is recognized as a valid input. Should the counter accumulator go outside this range, the strobe input is ignored. Since the module is considered an open type equipment, it should be installed into an enclosure with minimal pollution. For wiring connections, use copper wire with a minimum rating of 90 degrees Celsius. If two wires are allowed, then they should be of the same type. Before wiring, replacing modules, batteries, fuses or any other serviceable component, it’s recommended to TURN OFF the power. This is to avert any mishaps that may occur. Moreover, the product should be mounted in an enclosure certified for use in Zone 2, Group IIC, and rated IP54 minimum. During field wiring, shielded cable must be used for all cables connecting to the IC694APU300 High-speed Counter. The shielded cable should possess a high frequency ground within 6 inches of the IC694APU300 module.
|Module Type:||High Speed Counter|
|Count Rate:||High Freq. - 80 kHz, Low Freq. - 20 Hz|
|Input/Output Type:||Positive Logic|
|Output Protection:||3 Amp Fuse for all points|
|Local Fast Inputs:||(12) 5 VDC or 10 to 30 VDC|
|Power Consumption:||250 mA @ 5 VDC|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.