GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
IC693BEM321
SKU 2170139 UPC 0442542237733
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
MSRP $4470
Product Description
IC693BEM321 is a 90-30 GE Series I/O Link Master Module. GE 90-30 Series PLC acts as a master for the Fanuc input/output link. The serial interface for the input/output link provides the input/output data exchange at a very high-speed between a master and the 16 slaves. The master receives 1024 discrete inputs from slaves and sends 1024 discrete outputs. GE Fanuc Automation Corporation is the manufacturer of this module. This module uses a configuration software or the hand-held programmer for 90-30 GE Series for configuration.
Fanuc uses devices such as 90-70 Series PLCs, 90-30 Series PLCs, operator panels and connection units for slaves. The user can place some of the master modules for input/output links on the GE 90-30 Series PLC. When multiple master modules for input/output link are within the same PLC system, the input/output links are usually separate. The user can place the master module for input/output link on any of the input/output slots on any baseplate. A CPU baseplate can house up to six master modules for the input/output link.
Whenever a failure takes place, a pushbutton link resets and restarts the module. Thus, pushing the button restarts the whole link operation. One Honda-type of the connector with 20-pins located on the module’s front connects the first slave with input/output link. The 90-30 series input/output link module is compatible with RS422 and RS485 signal level. It is also compatible with many devices, including 90-30 Series CPU Models, 90-30 Series Hand-held Programmer, etc.
Technical Specifications
| Module Type: | I/O Link Interface |
| Number of Slots: | 1 (single slot) |
| Backplane Support: | Universal Backplane |
| I/O Points: | Up to 1024 inputs and 1024 outputs |
| Communication Ports: | (1) RS485/422 |
| LEDs | OK, ACTV, CFG |
Technical Information
Specifications
Module type: |
Series 90-30 PLC module, providing I / OLinkcommunica- tionswithI / Omaster. |
I / OPoints: |
1024 inputs and 1024 outputs |
+5V current: |
without Optical Adapterconnected:415mA with Optical Adapter:615mA |
Environmental: |
|
Operatingtemperature |
0C to +60C (32Fto +140F) |
Storagetemperature |
-40C to +85C (-40F to +185F) |
Humidity |
5% to 95% (non-condensing) |
Vibration |
3.5mmpeak-to-peak displacement 5 to 150Hz |
Shock |
15G for 11mS duration |
Altitude |
Operating: 10,000 feetNon-operating: 40,000 feet |
Troubleshooting
Troubleshooting IC693BEM321
Troubleshooting information is available on IC693BEM321's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693BEM321
PDF Supply can repair your IC693BEM321 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC693BEM321? Answer: The IC693BEM321 is an I/O Link Interface Master Module from the GE Fanuc 90-30 Series.
- Question: What does IC693BEM321 do for the 90-30 system? Answer: This module allows a 90-30 controller to act as a master on a proprietary Fanuc I/O Link.
- Question: How does the IC693BEM321 relate to the slaves? Answer: This module provides I/O Link communications with up to 16 slaves. The master can receive 1024 discrete inputs from slaves and send up to 1024 discrete outputs.
- Question: How many modules can be located in the main PACSystems 90-30 backplane? Answer: The maximum number of master modules installed on the backplane depends on the power that is available from the power supply.
- Question: Where must IC693BEM321 be located? Answer: IC693BEM321 can be installed in any available backplane slot except the CPU slot.
- Question: What should I do if my IC693BEM321 is not working properly? Answer: Your IC693BEM321 may need repair.
For more information on the IC693BEM321 I/O Link Interface Master Module of the GE Fanuc 90-30 Series, please see the Datasheet User-Manual.
Common related search terms: Buy, Datasheet, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
Adding Items to Cart
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.