GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

Mon-Fri 8AM-5PM EST



Rated 4.7/5 Based on 8 ratings.

Rate your purchase of the IC693CBL312
IC693CBL312 Cable Kit | Image

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

The IC693CBL312 is an I/O bus expansion cable manufactured by GE Fanuc. It is a 0.5 foot (0.15 meters) long, continuous shield cable. One end of the cable is equipped with a male 25-pin D connector, while the other end of the cable has a two- headed connector. One of these connectors is female and the other is male. IC693CBL312 is an I/O bus expansion cable is considered a wye cable. The cables primary purpose is to extend the IO bus to either remote or expansion baseplates. The cable is compatible with a Series 90-30 system. If the user needs more I/O slots within the system or wants baseplates located further away from the CPU, this IC693CBL312 wye cable is a necessary component of the solution.  

Users use a maximum of 7 cables when installing an I/O expansion system. However, the collective length of the cables between the CPU baseplate and the last expansion plate in the system cannot be longer than 50 feet or 15 meters.  To install a IC693CBL312, connect the single male connector with the 25-pin female port located on the CPU baseplate. To set up the system with cables, the single male connector needs to be connected to the 25-pin female connector on the CPU baseplate. This is on the right hand side. Next, use the male head on the dual connector side of the cable to connect with the 25-pin female connector located on the first expansion baseplate in the system.  The PLC system may malfunction should the guidelines for cable length be ignored. Users must also take care they do not connect or disconnect any cables when the I/O expansion baseplates are under power.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Emerson


PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.