GE / IP FANUC Series 90/30 In Stock
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC693CBL316 IC693CBL316-USBIC693CBL316AIC693CBL316BIC693CBL316C
The IC693CBL316 USB Serial Cable to RJ-11 connector cable can be used in a variety of applications. It is suited for connecting the Rs-232 port of DSM to PC, is protocol dependent, and can only be used for “serial comms.” Another name for this cable is “Station Manager Cable.” It is one of the cables that can be used for data collection or programming in communicating with a GEIC PLC/PAC. Because it is an RS-232 cable, it works for RX3i CPE 305 programming port and is also the “Station Manager Cable” for the Ethernet ETM001. This cable is shielded, 3-feet long (1meter), with a 6-pin RJ-11 connector on one end and a 9-pin D-shell connector on the other. Six pins of the RJ-11 connector connects to five pins of the 9-pin D-shell connector, with the 5th pin on the latter (i.e. 9-pin D-shell) connecting to both the 3rd (green) and 4th (brown) pins of the former (the RJ-11).
While one end of the IC693CBL316 cable connects to a USB port on a personal computer, the other end (RJ-11) connects to various interfaces as in the following examples and applications. By connecting to the RJ-11 faceplate serial port on CPUs 351, 352, and 363, the IC693CBL316 can be used for monitoring, configuring, firmware updating and programming purposes. On an IC693DSM302 module, the cable connects to the RJ-11 COMM port of the module and can be used for loading motion programs and firmware. The same applies also to the IC693DSM314 module where motion programs for the module can be loaded across the PLC backplane. It can connect to the Station Manager port on an IC693CMM321 Ethernet module or on an IC693CPU364 CPU module, which has a built-in Ethernet interface.
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.