GE / IP FANUC Series 90/30 In Stock
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
The GE Fanuc IC693CBL329 is a Cable for GE Fanuc series 90-30 PLCs with 32-point, dual 24-pin connectors. Each one of its 24 dual conductors can transfer 1.2 A of current. It is among the six types of cables that connect terminal blocks with module faceplates and ships in a kit of two (IC693CBK002).
This cable is 1 meter long, and its connectors turn 90 degrees. This angle minimizes the space needed between modules, yet the connectors on the modules have different orientations. This is why GE Fanuc IC693CBL329 has a left angle connector. The cable with the right angle connector of the same type has the code IC693CBL330. It is also included in IC693CBK002 cable kit.
It can connect modules with 32-point, dual 24-pin connectors with terminal blocks, using Terminal Block Quick Connect (TBQC). GE Fanuc IC693CBL329 Cable for GE Fanuc series 90-30 can also serve as a replacement for IC693CBL321 cable.
TBQC is a method to wire modules with terminal blocks and works with several discrete I/O Modules of GE Fanuc series 90-30. The difference is that the removable terminal board is replaced by the module’s faceplate built-in connector. To connect a 32-point, dual 24-pin connector module and field devices using TBQC terminal blocks, use both IC693CBL329 and IC693CBL330. Use two terminal blocks and connect both to the module’s faceplate connectors. Then wire the I/O devices to the terminal blocks. This method saves a lot of time and reduces wiring.
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.