1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.5/5 Based on 6 ratings.

Rate your purchase of the IC693CBL334
IC693CBL334 Cable Kit | Image

SKU 0  UPC 00


MSRP $124

PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson


  ON SALE ! 

4 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

Technical Specifications for IC693CBL334

ManufacturerGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL334
DescriptionI/O Module Connector Cable
Cable Length0.5 Meters
Connector Type24-Pin Connectors
Wire Size#24 AWG
Cable Orientation90-Degree, Right-Angle
Supported Modules32-Point and 16-Point Modules
Industry StandardsUL and CE
Average Weight0.34 Kilograms

Cable, Right Side, Two - 24 Pin 90 Degree Connectors, .5 Meter

The GE Fanuc IC693CBL334 Series 90-30 I/O Module Connector Cable is an unshielded 0.5-meter-long I/O module cable with 24-pin connectors on both ends. This cable is designed for the GE Fanuc Series 90-30 PLC system, and it can be used for connecting 32-point I/O modules that have dual 24-pin connectors to the terminal block quick-connect assemblies. The IC693CBL334 Connector Cable is built for use with the Series 90-30 IC693ACC329, IC693ACC337, and IC693ACC334 I/O Modules. The IC693CBL334 Connector Cable is supplied as a cable kit comprising a 0.5 meter-long left-side I/O connector cable (the IC693CBL333 Cable) and a right-side I/O connector cable (the IC693CBL334 Cable). The IC693CBL334 Kit’s right-angle I/O connector cable connects with a 24-pin connector on a 32-point I/O module or a single connector on the terminal block quick connect (TBQC) faceplate with the connector on one end, and to a connector on the terminal block with the connector on the other end.

The GE Fanuc IC693CBL334 Connector Cable is designed to replace the obsolete GE IC693CBL323, IC693CBL322, and IC693CBL321 Cables, and it features a 90-degree (right-angle) connector with reduced clearance space for PLC connection, and it is suitable for I/O modules with dual connectors. The IC693CBL334 Connector Cable provides reliable signal transmission between field devices THAT ARE connected on the bus and the programmable logic controllers. For the best wiring connections, the IC693CBL334 I/O Connector Cable is wired pin-to-pin with the corresponding connector pins on the I/O module, TBQC, and the terminal block, i.e. Pin A1 to Pin A1, Pin A2 to Pin A2, etc. The IC693CBL334 Connector Cable has a maximum cable connection length of 0.5 meters and a maximum connector depth of 2.5 inches.

Technical Information

The IC693CBL334 cable is designed and manufactured by GE Fanuc for connecting with the terminal block quick connect assemblies. It is an unshielded 0.5-meter cable with 24-pin D connector terminations on both ends. The IC693CBL334 cable is compatible with the GE IC693ACC334, IC693ACC329, and IC693ACC337 modules. This cable is suitable for connecting the terminal block quick-connect assembly and the TBQC faceplate connector which is situated on I/O modules. This cable can also be used to replace the IC693CBL321, 322, and 323 cables. This 24-pin I/O faceplate connector to the terminal block connector cable is included in the GE Fanuc IC693CBK004 cable kit with the CBL333 left angle cables. 


The IC693CBL334 connector cable is a 24-pin, 90 degrees, right side connector cable. Its right-angle connector orientation facilities work with I/O modules that have dual connectors. It has a pin-to-pin wire arrangement that connects pin A1 on the cable to pin A1 on the board and pin A2 on the cable to pin A2 on the board. The same cable with a 3-meter length and a stripped lead on one end is also available separately. This cable is rated at 1.2 Amps and if the field devices need more than 1.2 Amps, it is advised not to use the TBQC assembly. It is recommended to use a standard terminal board in those situations instead. When this cable connector is connected with Series 90-30 modules, it extends 2 inches out from the module face. During installation, make sure to select a cabinet that allows for the additional depth added by the connector. The IC693CBL334 connector cable ensures a flexible and reliable connection between the field devices and programmable logic controllers.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Emerson

All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.