1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.7/5 Based on 13 ratings.

Rate your purchase of the IC693CPU321
IC693CPU321 In Stock! 10 SLOT CPU RACK  IC693C IC693CP IC693CPU PDFsupply also repairs GE IP FANUC P

SKU 2173406  UPC 087400605721


MSRP $1594

Repair Service


Save $1,355

5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

Product Description

The GE Fanuc IC693CPU321 is a 10-slot baseplate that is compatible with the Battery Accessory Kit - IC693ACC315. This baseplate has an embedded CPUTo install the kit into this baseplate, the user needs to align the backplane connector on the accessory board with the power supply connector of the IC693CPU321. This is located on the backplane of the baseplate. It is important to push the accessory board towards the baseplate, ensuring it is fully seated. Distributors who are shipping the baseplate with the battery accessory already installed must take care with packaging the components. The board needs to be held in place by using cable ties.

Technical Specifications

Processor Speed     10 MHz
I/O Points 160
Register Memory:   1KBytes
Floating Point: No
16 BIT system Yes
Processor 80188


Technical Information



Troubleshooting IC693CPU321

Troubleshooting information is available on IC693CPU321's website page; it also includes a datasheet user-manual.  


Repair your IC693CPU321

PDF Supply can repair your IC693CPU321 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.


Customer Questions and Answers

  • Question:  What is an IC693CPU321?  Answer:  The IC693CPU321 is a 10 slot rack with an embedded Central Processing Unit (from the GE Fanuc Series 90-30). This unit is the "brains" of the PLC and is where most of the calculations take place. 
  • Question:  What's the first thing you should do when testing your IC693CPU321?  Answer:  When you power the IC693CPU321 up, you should be checking for an OK light.
  • Question:  What if I do not have an OK light after I have powered it up?  Answer:  If you don't have an OK light, then you won't be able to follow through with the test. The lack of an OK light indicates, right from the start, there is something wrong with your IC693CPU321.
  • Question:  What is this initial test showing?  Answer:  You're basically turning on the configuration and logic in this processor in order to set it to run mode. You want to see that this is a good working processor.
  • Question:  With what software should I test my IC693CPU321?  Answer:  You can test your IC693CPU321 with Proficy Machine Edition. 
  • Question:  What will I need to test my IC693CPU321?  Answer:  All you will need is your IC693CPU321 and a power supply.
  • Question:  If I think there is a problem with my processor, what should I do?  Answer:  You should, first, make sure the RUN light comes on and then let the processor run overnight (or even 2-3 days). This is to check that it's able to sustain itself in run mode. (You want to make sure it doesn't fail or fall out of run mode for any reason.) If it does fail or fall out of run mode, then you can try reading the faults or errors through the Proficy Machine Edition software. It may give you enough information to help you fix the problem. 
  • Question:  If I can't figure out how to fix my IC693CPU321, what is my next step?  Answer:  PDF Supply can repair your IC693CPU321 for you. 

For more information on the IC693CPU321 Central Processing Unit of the GE 90-30 Series, please see the Datasheet Manual. 






Upgrade Kit

New Features

Problems Resolved






  • UL Class I Div 2 approval and C-UL approval







  • OffDelay (OFDTR) Function 14
  • Active and Constant Sweep Modes
  • SVCREQ #26: Interrogate I/O
  • SVCREQ #23: Read Master Checksum
  • Masked Compare Word (MSKCMPW) Function 143
  • Masked Compare Dword (MSCCMPD) Function 144
  • Number of Enhanced GCMs Allowed
  • SNPX Protocol
  • I/O Link Master Module
  • Window Modes
  • Run-Mode Store
  • Range Function Block
  • Retentiveness of %G References






  • GCM+ Module Support
  • APM Config Verify
  • HHP Config Mode with I/O Scan
  • IC641 Programming Software Block Edit with Jumps


ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.
All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.