GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

Mon-Fri 8AM-5PM EST



Rated 4.4/5 Based on 24 ratings.

Rate your purchase of the IC693CPU350

SKU 2171159  UPC 0828140301456

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.



17 In Stock

✓  2 Year PDF Supply Warranty

*What is Remanufactured?

Repair Service


Save $357

5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

Technical Specifications for IC693CPU350

ManufacturerGE Fanuc
SeriesSeries 90-30
Part NumberIC693CPU350
Product TypeCPU
Compatible WithGE Fanuc Series 90-30 PLCs
Processor Speed25 MHz
Operating Temperature0 to 60 degrees Celsius
Current Input670 mA
Voltage Input5V DC

Product Description

The CPU Model 350 IC693CPU350, acts as a controller, I/O system, and speciality module designed to meet the demands of flexible industrial solutions.  Among other things, it comes with 32Kbytes user memory, 4K I/O, 8 Racks and a logic execution of 0.22msec/K.  It is compatible with advanced modules such as Ethernet, various bus modules, and control. Designed in a single overall architecture, the IC693CPU350 is well suited for thousands of applications, such as complex motion control, mining, water treatment, elevator control, high-speed packaging, injection molding, material handling, food processing, continuous emission monitoring and many more.  By configuring just the system you need, you save critical space and reduce cost.  Furthermore, IC693CPU350 can also be adapted to a wide range of applications  such as: digital interfaces (for push buttons, switches, proximity sensors, relays, contactors and many other devices), analog modules (with varying degrees of resolution for flow, temperature or pressure applications),  direct connect wiring or remote termination  and local or remote I/O systems.

It has a built-in Ethernet user-enabled communication which supports both SRTP and Modbus TCP/IP application protocols and provides a real-time link for connected systems.  With scalable processing power, users can create a system that is ideal today while leaving open the option of creating more powerful system tomorrow without changing your software.  An integrated motion control supports high performance in point-to-point applications.  With a variety of field bus interfaces, the IC693CPU350 enables distributed control and/or I/O.  Users can choose from a variety of easy to install and quick to configure field bus interface modules.  It is programmable with Proficy Logic Developer PLC-Machine Edition and supports a wide range of programming languages such as Ladder Diagram (LDI), Instruction List (IL), Structural Text (ST), and C Block.  It is a low-cost solution with redundant CPUs and power supplies for high availability solutions.

The IC693CPU350 is a single slot CPU module with one CPU baseplate and 7 expansion and/or remote baseplates.  It uses a 80386EX processor type with a speed of 25 MHz, operating with an ambient temperature of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). This CPU also has a typical scan rate of .22 msec/K and maximum user program memory of 32K bytes.  It is equipped with a built-in serial port which supports SNP/SNP-X slave protocols and a LAN port which supports multidrop, Ethernet, FIP, Profibus, GBC, GCM, and GCM+ option modules.  The controller supports shift registers, override, battery backed clock, PCM/CCM compatibility, periodic subroutine interrupts’ feature, floating point Math, and RAM and flash memory storage.  It requires 670 milliamps supplied from a +5 VDC power supply.

Technical Specifications

Processor Speed : 25 MHz
I/O Points : 2048
Register Memory : 19.9KBytes
Floating Point Math:  Yes
32 BIT system  
Processor: 80386EX


The IC693CPU350 CPU module is a product of GE Fanuc Automation and it is manufactured as a member of the Series 90-30 product line. It has a processor with a speed of 25 Megahertz and it can work as either an embedded or modular CPU for the Series 90-30 PLCs. For the embedded systems, the PLC baseplate has a built-in CPU module to help enable cost savings. The embedded systems are not as powerful as the modular systems, however. The modular PLC systems come with the CPU as a separate plug-in processor module. The GE Fanuc IC693CPU350 CPU module is a single-slot CPU module with 8 baseplates for every system, and these baseplates includes the CPU baseplate along with 7 other remote or expansion baseplates. The CPU module operates on a current of 670 milliamps and an input voltage of 5 Volts DC. It has a typical scan rate of 0.22 milliseconds/1 KB of logic.

The IC693CPU350 CPU module has a user program memory capacity of 32 KB at maximum, with discrete input points that have 2048 words of storage capacity and discrete output points that have 2048 words of storage capacity. The IC693CPU350 CPU module has a discrete global memory capacity of 1280 bits, and a register memory capacity of 9999 words. The analog inputs are rated at 2048 words, the analog outputs are rated at 512 words, and the system registers are rated 28 words. The GE Fanuc IC693CPU350 CPU module has support for over 2000 timers and counters. Additionally, this module also has support for the shift registers. It has one integrated serial port that supports the SNPX/SNP slave protocols. It operates in a temperature range of 0 to 60 degrees Celsius.

Technical Information


CPU350 Catalog Number IC693CPU350


CPU Type

Single slot CPU module


Total Baseplates per System

8 (CPU baseplate + 7 expansion and/or remote)


Load Required from Power Supply

670 milliamps from +5 VDC supply


Processor Speed

25 MegaHertz




Processor Type



Operating Temperature

0 to 60 degrees C (32 to 140 degrees F) ambient


Typical Scan Rate

0.22 milliseconds per 1K of logic (boolean contacts)

User Program Memory (maximum)

32K Bytes (not configurable)


Discrete Input Points - %I



Discrete Output Points - %Q



Discrete Global Memory - %G

1,280 bits


Internal Coils - %M

4,096 bits


Output (Temporary) Coils - %T

256 bits


System Status References - %S

128 bits (%S, %SA, %SB, %SC - 32 bits each)


Register Memory - %R

9,999 words


Analog Inputs - %AI

2,048 words


Analog Outputs - %AQ

512 words


System Registers (for reference table viewing only; cannot be referenced in user logic program)

28 words (%SR)





Shift Registers



Built-in Serial Port

1 (uses connector on PLC power supply). Supports SNP/SNP-X slave protocols. Requires CMM module for SNP/SNP-X master, CCM, or RTU slave protocol support; PCM module for RTU master support.



LAN - Supports multidrop. Also supports Ethernet, FIP, Profibus, GBC, GCM, GCM+ option modules.





Battery Backed Clock




Supports the periodic subroutine feature


Type of Memory Storage

RAM and Flash


PCM/CCM Compatibility



Floating Point Math Support

Yes.  Firmware-based in firmware releases 9.0 and later.





Troubleshooting IC693CPU350

Troubleshooting information is available on IC693CPU350's website page; it also includes a datasheet user-manual and a wiring diagram.  


Repair your IC693CPU350

PDF Supply can repair your IC693CPU350 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.


User Program Memory For CPUs


The User Program Memory for the IC693CPU350 as detailed in the Series 90-30 Hardware manual gfk0356q.pdf is incorrect for certain 350 CPUs.


The older revisions of the CPU had 32K of user program memory, and newer revisions (Firmware 9.0 and greater) have 74K.


Program Transfer from 90-30 CPU into VersaPro Using Hand Held Programmer


Program transfer from 90-30 CPU into VersaPro by using Hand Held Programmer.


It is possible to transfer a program from one 90-30 CPU that is isolated from VersaPro to another 90-30 CPU that is not, using the Hand Held Programmer. Upload the program from PLC into memory card of the Hand Held Programmer, then transfer the program back to the PLC on the other destination and then upload the program into VersaPro project.

According to VersaPro Help file, PLC Firmware Compatibility List, the minimum requirements for IC693CPU350 is BC(9.01), BD(9.10), BE(10.0) RA-BA(8.01).


Customer Questions and Answers

  • Question:   What is an IC693CPU350?  Answer:  The IC693CPU350 is a single-slot Central Processing Unit from the GE Fanuc Series 90-30. This unit is the "brains" of the PLC and is where most of the calculations take place.
  • Question:  What's the first thing you should do when testing your IC693CPU350?  Answer:  When you attach the IC693CPU350 to a 5 or 10 slot rack and power it up, you should be checking for an OK light.
  • Question:  What if I do not have an OK light after I have powered it up?  Answer:  If you don't have an OK light, then you won't be able to follow through with the test. The lack of an OK light indicates, right from the start, there is something wrong with your IC693CPU350.
  • Question:  What is this initial test showing?  Answer:  You're basically turning on the configuration and logic in this processor in order to set it to run mode. You want to see that this is a good working processor.
  • Question:  With what software should I test my IC693CPU350?  Answer:  You can test your IC693CPU350 with Proficy Machine Edition. 
  • Question:  What will I need to test my IC693CPU350?  Answer:  All you will need is your IC693CPU350, a 5 or 10 slot rack, and a power supply.
  • Question:  If I think there is a problem with my processor, what should I do?  Answer:  You should, first, make sure that when you turn on the memory on/off protection switch, the RUN light comes on and then let the processor run overnight (or even 2-3 days). This is to check that it's able to sustain itself in run mode. (You want to make sure it doesn't fail or fall out of run mode for any reason.) If it does fail or fall out of run mode, then you can try reading the faults or errors through the Proficy Machine Edition software. It may give you enough information to help you fix the problem.
  • Question:  If I can't figure out how to fix my IC693CPU350, what is my next step?  Answer:  PDF Supply can repair your IC693CPU350 for you. 

For more information on the IC693CPU350 Central Processing Unit of the GE 90-30 Series, please see the Datasheet Manual. 











Upgrade Kit


New Features


Problems Resolved







See GFK-1512R







Loss/add of module faults with IC693ALG222/223







MOVE_REAL operation Config Not Equal with DSM324 PID Function Block






ATEX certification








CPU won't handle 11K byte smart module init file Load of large (>32K) DSM zip files fails







Rotate Right and Rotate Left functions do not handle error condition correctly






Time of Day clock at powerup may not operate Error when run-mode storing, loading, or verifying exactly 50 blocks in run mode






Fatal Fault retry does not work correctly for some faults






Hardware Update to Enhance EMC Performance







IC693DSM314 support added

User Flash Write and Erase Failure



Local Logic Programs with VersaPro 1.10

PLC can Automatically go to Run Mode



Reboot after Fatal Fault Drum Sequencer function

Retentive Contact Previous Values Table not being cleared







AI & AQ Above Default Values


Load File of Size 1528 Bytes C Program with Code Area Greater Than 64K Bytes







SNP Master mode on CPU Ports Online Changes to Reference Tables


350 9.00 Upgrade Read from Flash






Software Floating Point

Keyswitch Configured as RUN/STOP Switch



Sequential Event Recorder

Storing IC693CMM321 Configuration with Windows PLC Programming Software




RET_PBLOCK_LIST Service Request #7






Demko Agency approval

Hardware Change that Improves Reliability



ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: BatteryBuyConfigurationDatasheetEmersonFirmwareManualPriceRepairSpecificationTroubleshootWiring


PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.