GE / IP FANUC Series 90/30 In Stock
SKU 2177254 UPC 0558145183282
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The GE Fanuc IC693CPU363 is a Module of GE Fanuc series 90-30 PLC systems. It connects to one of the CPU slots on a baseplate. This CPU is of type 80386X and has a speed of 25Mz. It gives the baseplate the ability to connect to up to seven remote or expansion baseplates. The power required for it to work is +5VDC and 890mA current. It has a battery to back up a clock and can be overridden. When it operates, its temperature can vary from 0 to 60 degrees in ambient mode.
GE Fanuc IC693CPU363 module has three ports. The first port supports SNP or SNPX slave on the power connector. The two other ports support SNP or SNPX master and slave, and RTU slave. It is also compatible with RTU master and CCM Modules. To support RTU master, a PCM module is needed. Connectivity is also provided by a LAN port that supports FIP, Profibus, GBC, GCM, and GCM+ modules. It also supports multidrop.
The total user memory of the GE Fanuc IC693CPU363 module is 240 kilobytes and the typical scan rate of 1 kilobyte of logic is 0.22 milliseconds. It has 2048 input (%I) and 2048 output (%Q) points. The discrete global memory (%G) of the CPU is 1280 bits. Internal Coils (%M) take a space of 4096 bits and Output or temporary Coils (%T) deploy 256 bits. System Status Referenced (%S) use 128 bits.
The Register Memory (%R) can be configured with either Logicmaster or Control v2.2. Logicmaster configures the GE Fanuc IC693CPU363 Module memory in 128 word increments up to 16,384 words. Control v2.2 can do the same configuration deploying up to 32,640 words. Analog inputs (%AI) and outputs (%Q) can be configured exactly like the Register Memory using the same programs. GE Fanuc IC693CPU363 has system registers that consist of 28 words.
|Processor Speed :||25 MHz|
|I/O Points :||2048|
|Register Memory :||240KBytes|
|Floating Point Math:||Yes|
|32 BIT system|
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.