GE / IP FANUC Series 90/30 In Stock
SKU 2178144 UPC 0799705805668
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The IC693CPU367 is a Central Processing Unit with an embedded PROFIBUS Master from Series 90-30 from the manufacturer GE Fanuc. This CPU operates as a slave on a PROFIBUS-DP network and communicates with a PROFIBUS DP master. The IC693CPU367 automatically exchanges data with a master device, although it has no bus access rights. It can only acknowledge received messages or transmit messages to a master after they have been requested.
The IC693CPU367 provides the following PROFIBUS communication features: It has the ability to read up to 244 bytes of input data from the network and send up to 244 bytes of output data. The IC693CPU367 supports all standard PROFIBUS data rates. It supports DP-V1 read, write, and alarm messages. The IC693CPU367 is a PROFIBUS compliant module. It has network status LEDs. The IC693CPU367 has an RS-232 serial port (service port) for upgrading the firmware.
Important considerations: To configure the module’s software, the user should use Proficy Machine Edition Logic Developer version 5.0 or later. A CPU version 10.72 or later is required for the IC693CPU367.The storage temperature for the IC693CPU367 is -40 to 85 degrees Celsius.The IC693CPU367’s operating temperature is 0 to 60 degrees Celsius.Its backplane current consumption is 940mA at 5VDC.The IC693CPU367 supports all standard data rates (9.6 KBit/s, 19.2 KBit/s, 93.75 KBit/s, 187.5 KBit/s, 500 KBit/s, 1.5 MBit/s, 3 MBit/s, 6 MBit/s, and 12 MBit/s).
|I/O Points:||4096 (discrete)|
|Register Memory:||240KBytes Total|
|Floating Point Math:||Yes|
|32 BIT system|
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.