GE / IP FANUC Series 90/30 In Stock
SKU 2170213 UPC 0165647495456
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The GE Fanuc IC693DSM324 is a motion controller used in the PACsystems RX3i which performs the operations like math synchronous and logic decisions at high speed. This module requires CPU firmware for the 90-30 series of version 10 or later. The power needed for this module is 5V DC and current drawn from the DSM is 860 mA along with the encoder current. The Load parameter COMM_REQ function is used to prevent the loss of PLC module faults in IC693DSM324 motion controller.
The IC693DSM324 path generator runs at a higher velocity than the programmed velocity. This module does not support any external decoders. Also, the servo jump occurs whenever the amplifier stops working, making the servo to get re-enabled. This can be prevented by using cycle v24 which has direct control over the servo amplifier. The IC693DSM374 may permit jog beyond the specified EOT limits. Thus the EOT limit must be less than the corresponding position limit in order to stop the jog. The module performs the function of halting programmed motion as well as follower motion by aborting %Q bit and enabling %Q bit. While disabling the master axes, the CAM should be aborted in case the operation of CAM command has to be carried out in an absolute mode. The module IC693DSM374 can be used in the applications involving mechanical cams because of the presence of an electronic CAM follower. This module also controls digital servos of four αi and βi series.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.