GE / IP FANUC Series 90/30 In Stock
SKU 2176450 UPC 0611384287323
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
IC693MDL330 is a 120/240 volt, 2-Amp AC Output Module for the GE Fanuc Series 90-30. The module provides four output points in each of its two isolated groups for a total of eight. The two commons are not compound for this module. This allows each group to perform on completely individual AC-supplied phases. Alternatively, they can all also work using the same supply. Each group also has the protection of a 5-ampere fuse for each common. There is an RC snubber in place for each output to protect against transient electrical noise on the power line.
The output voltage range for this module is 85 to 264 volts AC, 50/60 Hz. The output current is 2 amperes maximum per point. Per group, the maximum is 4 amps at 40 °C (104 °F). The IC693MDL330 provides high-degree inrush current (10x the rated current/ 20 amperes maximum for one cycle), making the outputs suitable for controlling a wide range of inductive and incandescent loads. The minimum load current is 100 mA.
The user must provide AC Power for operating loads connected to outputs. DC is not supported. The IC693MDL330 module has LED indicators at the top, which display the ON/OFF status for each point. There are two horizontal rows with eight green LEDs each, as well as one LED at the center between the two rows. The eight upper LEDs, which are labeled A1 through 8, indicate output status. The red “F” LED indicates a blown fuse, showing ON if this happens. The IC693MDL330 has an insert between the inside and outside surface of the hinged door. When the hinged door is closed, the surface facing the inside of the module displays circuit wiring information, and circuit identification information can be recorded on the external surface. The external left edge of the insert is color-coded red to indicate a high-voltage module. The IC693MDL330 has an ON response time of 1 ms maximum, while the OFF response time is ½ cycle maximum. Its power consumption is of 160 mA (with all outputs on) from 5 voltages bus on backplane.
|Rated Voltage:||120/240 volts AC|
|# of Inputs:||8|
|Output Current:||2.0 A per point|
|Output Voltage Range:||85 - 132 volts AC|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.