GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
IC693MDL350
SKU 2175302 UPC 0427126739025
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
MSRP $2830
Product Description
The GE Fanuc IC693MDL350 is 120/240V AC 16 point isolated output module which provides 16 individually isolated points. This module only uses an AC power source to operate the output loads. The output current is 2.0A per point. The rated voltage for the IC693MDL350 is 120/240V AC. The power consumption from this module is around 315mA from 5V bus.
The IC693MDL350 is equipped with a DIP switch at the back of the module which determines how the CPU operates when the CPU is in the stop mode. This switch is used to select the default mode. Two DIP switches are used on the module wherein only the upper switch is used. Hence, this switch facilitates turning off the output whenever the communication with the CPU is lost. When this happens, the switch will be in the right position. When the switch is in the left position, the output retains the programmed value. While operating the IC693MDL350, proper external fuses must be used to avoid short-circuiting.
The LED indicators are used to indicate the presence of a removable terminal block. The LED indicator will glow green when the terminal block is present otherwise LED will glow red, which means the terminal block is absent. To protect the output against the electrical noise, the IC693MDL350 provides high-level noise immunity which minimizes the need for external snubbers. The output of this module influences the wide range of incandescent or inductive loads.
Technical Specifications
| Rated Voltage: | 120/240 volts AC |
| # of Outputs: | 16 |
| Freq: | 50/60 Hz |
| Output Current: | 2.0 A per point |
| Output Voltage Range: | 74 - 264 volts AC |
| DC Power: | No |
Technical Information
|
Rated Voltage |
120/240 VAC |
|
Output Voltage Range |
74 – 265VAC (47 to 63 Hz), 120/240VAC nom. |
|
Outputs per Module |
16 isolated |
|
Isolation |
|
|
Field to Backplane |
250 VAC continuous; 1500 VAC for 1 minute |
|
Group to Group |
250 VAC continuous; 1500 VAC for 1 minute |
|
Power Consumption |
315 mA (with all outputs ON) from 5 volt bus on backplane |
|
Output Current (Linear |
Per Point: 2A max. @ 30°C, 1A max. @ 60°C |
|
Derating) |
Per Module: 5A max. @ 30°C, 4A max. @ 60°C |
|
Output Characteristics: |
|
|
Inrush Current |
20 Amps maximum for one cycle |
|
Minimum Load Current |
10 mA per point |
|
Output Voltage Drop |
1.5 volts maximum |
|
Output Leakage Current |
2 mA maximum |
|
On Response Time |
1/2 cycle maximum |
|
Off Response Time |
1/2 cycle maximum |
|
Fuses |
No internal fusing. Use of appropriate external fuses is |
|
|
recommended for short circuit protection. |
Troubleshooting
Troubleshooting IC693MDL350
Troubleshooting information is available on IC693MDL350’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693MDL350
PDF Supply can repair your IC693MDL350 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC693MDL350? Answer: The IC693MDL350 is a 120/240 volt, 0.5 Amp AC Output module in the GE Fanuc 90-30 Series. This module provides 16 isolated output points.
- Question: What is the rated voltage of IC6963MDL350? Answer: 120/240 volts AC
- Question: What is the output voltage range of IC693MDL350? Answer: 74 to 264 volts AC, 50/60 Hz
- Question: What kind of power source does this module require? Answer: The IC693MDL350 requires an AC power source.
- Question: With what is each group protected? Answer: 3 amp fuse. A RC snubber is also there for each output to protect from transient electrical noise.
- Question: Into what can the IC693MDL350 be installed? Answer: The IC693MDL350 can be installed in any I/O slot of a 5 or 10 baseplate in a Series 90-30 PLC system.
- Question: What should I do if my IC693MDL350 is not working properly? Answer: If your IC693MDL350 is not correctly working, then your product may need repair.
For more information on the IC693MDL350 AC Output Module of the GE 90-30 Series, please see the Datasheet Manual.
|
Version |
Description |
|
IC693MDL350-CA Firmware version: 1.20 |
Label change only. No change in functions, performance or compatibility. |
|
IC693MDL350-BA Firmware version: 1.20 |
Hardware update to correct a manufacturing issue. |
|
IC693MDL350-AA Firmware version: 1.20 |
Initial Release |
Common related search terms: Buy, Datasheet, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
Adding Items to Cart
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.