GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
IC693MDL634
SKU 2178241 UPC 0681087659826
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
MSRP $795
Product Description
The IC693MDL634 is a 24-volt DC Positive/Negative Logic Input Module for the Series 90-30 Programmable Logic Controller by GE Fanuc.
Once the current goes through an input point, the result is a logic 1 in the input status table (%I). The user can supply power to operate field devices, or an isolated +24 VDC output can be used to supply power to a limited number of DC inputs. The IC693MDL634’s Input Voltage Range goes from 0 to +30 volts DC, and its input current is of 7 mA (typical) at rated voltage. It functions with an on-state voltage of 11.5 to 30 volts DC and an off-state voltage of 0 to +5 volts DC. Its minimum on-state current is 3.2 mA and has a maximum off-state current of 1.1 mA.
The IC693MDL634 has LED light indicators on top for a convenient display of the ON/OFF status for each of its eight points. This LED block has two horizontal rows with eight green LEDs in each row; the top row, which is labeled A1 through 8 (points 1 through 8) is used by this module. An insert separates the inside and outside surface of the IC693MDL634’s hinged door and is identifiable by a blue-colored left edge, which signals a low-voltage module. Information on circuit wiring is located on the interior, and identification information can be recorded on the external surface. This module can be installed in any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLC system.
Technical Specifications
| Rated Voltage: | 24 volts DC |
| # of Inputs: | 8 |
| Freq: | n/a |
| Input Current: | 7.0 mA |
| Input Voltage Range: | 0 to -30 volts DC |
| DC Power: | No |
Technical Information
Rated Voltage 24 volts DC
Input Voltage Range 0 to +30 volts DC
Inputs per Module 8 (one group with a single common)
Isolation 1500 volts between field side and logic side
Input Current 7 mA (typical) at rated voltage
Input Characteristics
On-state Voltage 11.5 to 30 volts DC
Off-state Voltage 0 to +5 volts DC
On-state Current 3.2 mA minimum
Off-state Current 1.1 mA maximum
On response Time 7 ms typical
Off response Time 7 ms typical
Power Consumption: 5V 45 mA (all inputs on) from 5 volt bus on backplane
Power Consumption: 24V 62 mA from the Isolated 24 volt backplane bus or from user supplied power
Troubleshooting
Troubleshooting IC693MDL634
Troubleshooting information is available on IC693MDL634’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693MDL634
PDF Supply can repair your IC693MDL634 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC693MDL634? Answer: The IC693MDL634 is a 24 volt DC Positive/Negative Logic Input module for the GE Fanuc Series 90-30. It provides 8 input points in 1 group with a common power input terminal.
- Question: What is the rated voltage of IC693MDL634? Answer: 24 volt DC
- Question: What is the input voltage range of IC693MDL634? Answer: 0 to -30 volts DC
- Question: What kind of power source does this module require? Answer: The IC693MDL634 requires an DC power source.
- Question: Into what can the IC693MDL634 be installed? Answer: The IC693MDL634 can be installed in any I/O slot of a 5 or 10 baseplate in a Series 90-30 PLC system.
- Question: What should I do if my IC693MDL634 is not working properly? Answer: If your IC693MDL634 is not correctly working, then your product may need repair.
For more information on the IC693MDL634 DC Input Module of the GE 90-30 Series, please see the Datasheet Manual.
Adding Items to Cart
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.