GE / IP FANUC Series 90/30 In Stock

Call Now

1-800-360-6802

Mon-Fri 8AM-5PM EST

1-919-535-3180

IC693MDL635B

GE Intelligent Platforms / GE Fanuc - Series 90-30 - IC693MDL635

GE Intelligent Platforms / GE Fanuc - Series 90-30 - IC693MDL635 IC693MDL635 | Image

MSRP $795

Repair Service

$100

Save $695

Fast or Free!

2 Year warranty

*What is Fast Repair?

Free Ground Shipping*

US continental orders placed Monday-Friday before 4:30pm EST!

Lowest Price Guarantee

Product Description


The IC693MDL635 is a 125-volt DC Positive/Negative Logic Input module. This GE Fanuc module is specifically designed for compatibility in the RX3i system and can be installed into any I/O within the system. IC693MDL635 has dual logic characteristics – i.e. positive or negative and has 16 input points in one group with a common power input terminal.  When current flows into an input point, it produces a logic 1 in the status table of the input (%I).  The IC693MDL635 design input characteristics make it suited to and operational with a robust option of input devices, such as electronic proximity switches, pushbuttons and limit switches. Located on the top face the module are two horizontal rows with eight green LEDs.  On the upper row, the LEDs are labeled 1 to 8. The LEDs situated on the bottom row are labeled 9 through 16.  These LEDs communicate the “on” or “off” status of each input point to the user.

This 125-volt DC Positive/Negative Logic Input module has a rated voltage of 125 volts with a DC input voltage range of 0 to +150 volts DC.  Its isolation (field to Backplane, optical, and to frame ground) is 250 VACs continuous; 1500 VAC for one minute.  The input current when operating at the rated voltage is typically 1.97 mA.  IC693MDL635 has input characteristics that feature the on-state voltage of 90 to 150 volts DC while the off-state voltage is 0 to 30 volts DC.  The on-state current has a 1.41 mA minimum and the off-state current has a 0.46 mA maximum.  The and off response time is also typically 8 ms for each.  Power consumption at 5V is 80 mA (when all inputs are on) from a 5-volt bus on the backplane.  Power consumption at 125V is 31.5 mA from user-supplied power when all inputs are on at 125VDC.  To identify the module as a high-voltage module, there are red bands on the label.

For terminal block wiring, the torque must be in the range 9.6 to 11.5 in.-ib (1.08 to 1.30 n-M); the wiring -   copper conductors stranded or solid 90C rated, one 14-22 AWG or two 16-22 AWG.  Either solid or stranded wires, but not combined, are to be used in the same terminal.  Also, no combinations of different wire sizes are to be used in one terminal.

Technical Specifications


Rated Voltage: 125 volts DC
# of Inputs: 16 (1 group)
Freq: N/A
Input Current: 1.97 mA
Input Voltage Range:   0 to +150VDC
Power Consumption:    80 mA from 5V bus, 31.5 mA from user supply

 

GE Input module 125 VDC 16 point POS/NEG logic. Module does not have UL certification.
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms:

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.

TOP