GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
IC693MDL646
SKU 2172042 UPC 0427761109443
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
MSRP $1092
Product Description
The IC693MDL646 module is a 24-volt DC positive / negative logic input module for the 90-30 series of Programmable Logic Controllers. It comes with 16 input points in one group sharing a common power input terminal. The IC693MDL646 is designed to have either positive Logic or negative logic characteristics. Input characteristics make it compatible with a wide array of user supplied input devices such as limit switches, push buttons as well as proximity switches. Power to run the field devices is normally supplied by the user or an isolated +24VDC supply on the power supply.
At the top of the module, one can locate LED indicators which display the ON/OFF status of each point. The LED block is partitioned into 2 horizontal rows with 8 green LEDs in each row. The top row is labelled from A1 to A8 (Point 1 to 8) and the bottom from B1 to B8 (point 9 to 16). There’s an insert that goes between the inside and outside surface of the hinged door. Towards the inside, one will find the wiring diagram, and the circuit identification is located on the outside surface. The outside left edge of the insert is color-coded blue to show a low-voltage module. This module can be installed in any I/O slot in a Series 90-30 PLC system. Other specifications include an input voltage range of 0 to 30 VDC and input current of 7 mA. The on-state voltage is between 11.5 to 30 V and on-state voltage 0- +5V DC. On-state current rating is 3.2mA minimum and off-state 1.1mA maximum.
Technical Specifications
| Rated Voltage: | 24 volts DC |
| # of Inputs: | 16 |
| Freq: | n/a |
| Input Current: | 7.0 mA |
| Input Voltage Range: | 0 to -30 volts DC |
| DC Power: | Yes |
Technical Information
Rated Voltage 24 volts DC
Input Voltage Range 0 to +30 volts DC
Inputs per Module 16 (one group with a single common)
Isolation 1500 volts between field side and logic side
Input Current 7 mA (typical) at rated voltage
Input Characteristics
On-state Voltage 11.5 to 30 volts DC
Off-state Voltage 0 to +5 volts DC
On-state Current 3.2 mA minimum
Off-state Current 1.1 mA maximum
On response Time 1 ms typical
Off response Time 1 ms typical
Power Consumption: 5V 80 mA (all inputs on) from 5 volt bus on backplane
Power Consumption: 24V 125 mA from the Isolated 24 volt backplane bus or
from user supplied power
Troubleshooting
Troubleshooting IC693MDL646
Troubleshooting information is available on IC693MDL646’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693MDL646
PDF Supply can repair your IC693MDL646 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC693MDL646? Answer: The IC693MDL646 is a 24 volt DC Positive/Negative Logic Input module for the GE Fanuc Series 90-30. This module provides 16 input points in 1 group with a common power input terminal. The IC693MDL646 is made to have either positive logic or negative logic characteristics.
- Question: What is the rated voltage of IC6963MDL646? Answer: 24 volts DC
- Question: What is the input voltage range of IC693MDL646? Answer: 0 to +30 volts DC
- Question: What kind of power source does this module require? Answer: The IC693MDL646 can be powered by the user supply or an Isolated +24 VDC supply can power a select amount of inputs.
- Question: With what are the input characteristics compatible? Answer: They are compatible with pushbuttons, limit switches, and electronic proximity switches.
- Question: Into what can the IC693MDL646 be installed? Answer: The IC693MDL646 can be installed in any I/O slot of a 5 or 10 baseplate in a Series 90-30 PLC system.
- Question: Why is the outside left edge of the insert color-coded blue? Answer: It means that this is a low-voltage module.
- Question: What should I do if my IC693MDL646 is not working properly? Answer: If your IC693MDL646 is not correctly working, then your product may need repair.
For more information on the IC693MDL646 DC Positive/Negative Logic Input Module of the GE 90-30 Series, please see the Datasheet Manual.
Common related search terms: Buy, Datasheet, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
Adding Items to Cart
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.