GE / IP FANUC Series 90/30 In Stock
IC693MDL653 is a 24-volt DC Positive/Negative Logic Input module for the Series 90-30 Programmable Logic Controllers. It presents 32 input points grouped into four with each group comprising eight points. The four groups consist of two ordinary pins each are knotted together internally. IC693MDL653 has a maximum of 2 milliseconds for the “on” and “off” response periods. The 32-point input module has both positive and negative features. When linked to a positive logic it drives currents from the input device attached to the positive power and circuit input to the negative bus. The module also gets currents from the input device and transfers them to the positive power bus when conjoined for negative logic. The input features are suitable for many input devices which include; less switches pushbuttons, and electronic proximity switches. The user provides the ability to run the field devices. Most attachments to the input circuits are created from the user’s input devices and using an IC693MDL653 cable together with a 32-point High-Density modules that have a 50-pin Honda connector built on the front of the module.
The GE Fanuc provides prewired cables ending with terminal lugs that contain connectors at one end and wires on the opposite end. IC693MDL653 lack LED indicators for displaying circuit conditions. Further, the module can be set up in an I/O port which has a 5 - 10-slot baseplate in a Series 90-30 PLC system. The module has an Input Current of 7.5 mA (average) at rated voltage. It has input features which entails having an On-state Voltage of 15 volts DC minimum, Off-state Voltage 6 volts DC maximum, On-state Current 4.5 mA minimum and Off-state Current 2 mA maximum. In addition, the highest number of inputs switched on at the same time should be no more than 16.
|Rated Voltage:||24 volts DC|
|# of Inputs:||32|
|Input Current:||7.5 mA|
|Input Voltage Range:||24 volt DC (+10%, -20%)|
Specification for IC693MDL653
Rated Voltage 24 volts DC
Input Voltage Range 24 volts DC (+10%, –20%)
Inputs per Module 32 (four groups with two commons per group)
Isolation 1500 volts between field side and logic side
Input Current 7.5 mA (average) at rated voltage
On-state Voltage 15 volts DC minimum
Off-state Voltage 6 volts DC maximum
On-state Current 4.5 mA minimum
Off-state Current 2 mA maximum
On response Time 2 ms maximum
Off response Time 2 ms maximum
Internal Power Consumption 5 mA (16 inputs on) from 5 volt bus on the backplane
Repair your IC693MDL653
PDF Supply can repair your IC693MDL653 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
For more information on the IC693MDL653 DC Positive/Negative Logic Input Module of the GE 90-30 Series, please see the Datasheet Manual.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.