1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

IC693MDL654

Rated 4.3/5 Based on 4 ratings.

Rate your purchase of the IC693MDL654
Loading...

SKU 2170362  UPC 0353907096196

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Common misspellings:
  • 1C693MDL654
  • IC693MD1654
  • IC693MDL65A
  • IC693MDL654

Technical Specifications for IC693MDL654

ManufacturerGE Fanuc
SeriesSeries 90-30
Part NumberIC693MDL654
Product TypeInput Module
Rated Voltage5/12V DC, (+/- Logic)
Input Voltage0-15V DC
Typical Input Current at 5V DC3.0 mA
Typical Input Current at 12V DC8.5 mA
On-state Voltage4.2-15V DC
Off-state Voltage0-2.6V DC

Product Description


IC693MDL654 is a 5/12 volt DC (TTL) Positive/Negative Logic Input module for the Series 90-30 Programmable Logic Controller. It delivers 32 discrete TTL voltage threshold input points which are grouped into four distinct groups, with each group having a total number of eight points labelled (A1 - A8, B1 - B8, C1 - C8, and D1 - D8). The inputs work in line to about 15V having positive or negative logic inputs. The +5V supply is produced on the module and later separated from the PLC backplane. One can decide to power the inputs from the internal supply rather than powering them with an external user issued supply. This can be made possible by Setting up jumpers on the right pins on the I/O connector. If this internal supply is used to power the inputs, more loading will be put on the PLC's +5V power supply in case an internal supply is utilized to power the inputs. Opto-couplers found on the module offers and supports backplane isolation of 1500 volts between field side and logic side and 250 volts between the four classes. In addition, no faults diagnostics are noted on the power supply. IC693MDL654 consumes an internal power of 195 mA from +5V bus on backplane.

The module consists of LED indicators listed as; A1 - A8, B1 - B8, C1 - C8, D1 - D8 located at the top of the module. The indicator provides ON/OFF status of every input point. The input current is 3.0 mA (typical ON current at 5 VDC) and 8.5 mA (typical ON current at 12 VDC). IC693MDL654 is of 32-point input design which uses 32 bits of discrete %I input data. It can be placed on an I/O port on a 5 or 10-slot baseplate in a Series 90-30 PLC system. Current from an input point leads to logic 1 within the input status table. Rated Voltage for IC693MDL654 is 5 to 12 volts DC, Positive or Negative Logic while the Input Voltage Ranges from 0 to 15 volts DC Links to the input circuits are created from the user’s input devices to two male (pin-type) 24-pin connectors (Fujitsu FCN-365P024-AU) placed on the front of the module. This link placed on the front viewpoint borders between class A and B.The another one on the left side borders class C and D. A cable that has a  female connector on a single end with wires which is stripped enhances field wiring to field devices from modules connectors.

Technical Specifications


Rated Voltage: 5 to 12 volts DC
# of Inputs: 32
Freq: n/a
Input Current: 3.0 mA @ 5 VDC, 8.5 mA @ 12 VDC
Input Voltage Range:    0 to 15 volts DC
DC Power: Yes

 

GE Fanuc Automation manufactures the IC693MDL654 module as an input module and a member of the Series 90-30 PLC product line. This input module is engineered and intended to meet the requirements for flexible industrial applications. It also comes with control architecture which makes it suitable for various applications such as material handling, high-speed packaging, and complex motion control applications. The GE Fanuc IC693MDL654 input module provides amazing flexibility through its modular design, and when this unit is properly configured, the operators can save on installation costs and space. It supports Ethernet communication through which it achieves monitoring in real-time. When installing this input module, the operators can start with an Ethernet-enabled CPU or the rack-mounted Ethernet module. This input module has support for the Modbus TCP/IP and SRTP application protocols, and it comes with scalable processing power which is common is many CPUs in Series 90-30 and which makes upgrading easy.

The GE Fanuc Automation IC693MDL654 input module also uses its scalable processing power which helps to enable the module to be able to operate at an optimal level of performance as required by modern industrial applications. This input module has a built-in motion control feature that helps to ensure that the input module achieves the level of performance that is required for the point-to-point applications. The input module also has field bus interface options that enables distributed control. The users have interface options such as the Profibus-DP, EtherNet EGD, or the Genius interface. Additionally, this module comes with a CIMPLICITY Machine Edition Logic Developer program which makes programming the unit easier.  The GE Fanuc Series 90-30 input modules like this one all have redundancy options.

Technical Information

Specifications for IC693MDL654

Rated Voltage                                         5 to 12 volts DC, Positive or Negative Logic
Input Voltage Range                              0 to 15 volts DC
Inputs per Module                                 32 (four groups of eight inputs each)
                                                                        98.4 feet (30 meters) , maximum cable length
Isolation                                                  1500 volts between field side and logic side
                                                                 250 volts between groups
Input Current                                         3.0 mA (typical ON current @ 5 VDC)
                                                                 8.5 mA (typical ON current @ 12 VDC)
Input Characteristics
On-state Voltage                                   4.2 to 15 volts DC
Off-state Voltage                                   0 to 2.6 volts DC
On-state Current                                  2.5 mA (minimum)
Off-state Current                                 1.2 mA (maximum)
On response Time                              1 ms maximum
Off response Time                              1 ms maximum
Internal Power Consumption            195 mA (maximum) from +5V bus on backplane; (29
                                                                  mA + 0.5 mA/point ON + 4.7 mA/LED ON) 440 mA
                                                                  (maximum) from +5V bus on backplane
                                                                  (if module isolated +5V supply used to power inputs
                                                                  and all 32 inputs ON)
                                                              96 mA (typical) from user input supply @ 5 VDC and all
                                                                  32 inputs ON)
                                                              272 mA (typical) from user input supply @ 12 VDC and
                                                                  all 32 inputs ON)
Isolated                                               +5V Supply +5 volts DC ±5%
Current limit                                       150 mA (typical)

Troubleshooting

Troubleshooting IC693MDL654

Troubleshooting information is available on IC693MDL654’s website page; it also includes a datasheet user-manual and a wiring diagram.  

 

Repair your IC693MDL654

PDF Supply can repair your IC693MDL654 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

 

Customer Questions and Answers


  •  Question:  What is an IC693MDL654?  Answer:  The IC693MDL654 is a 5/12 volt DC (TTL) Positive/Negative Logic Input module for the GE Fanuc Series 90-30. This module provides 32 discrete TTL input points. The inputs are arranged in 4 isolated groups of 8 and each group has its own common.  
  • Question:  What is the rated voltage of IC6963MDL654?  Answer:  5 to 12 volts DC, Positive or Negative Logic
  • Question:  What is the input voltage range of IC693MDL654?  Answer:  0 to 15 volts DC
  • Question:  What kind of power source does this module require?  Answer:  A single, regulated +5V supply is available through the I/O connectors on the front of the module.
  • Question:  What type is this module configured?  Answer:  The configuration of IC693MDL654 is as a 32-point input type and it uses 32 bits of discrete input data.
  • Question:  Into what can the IC693MDL654 be installed?  Answer:  The IC693MDL654 can be installed in any I/O slot of a 5 or 10 baseplate in a Series 90-30 PLC system.
  • Question:  What should I do if my IC693MDL654 is not working properly?  Answer:  If your IC693MDL654 is not correctly working, then your product may need repair.

For more information on the IC693MDL654 DC Positive/Negative Logic Input Module of the GE 90-30 Series, please see the Datasheet Manual.

 

 

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: BuyDatasheetEmersonManualPriceRepairSpecificationTroubleshootWiring

ALL ONLINE ORDERS PLACED BEFORE 4:00 PM EST SHIP SAME DAY highlight_off

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.