GE / IP FANUC Series 90/30 In Stock
SKU 2170362 UPC 0353907096196
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
IC693MDL654 is a 5/12 volt DC (TTL) Positive/Negative Logic Input module for the Series 90-30 Programmable Logic Controller. It delivers 32 discrete TTL voltage threshold input points which are grouped into four distinct groups, with each group having a total number of eight points labelled (A1 - A8, B1 - B8, C1 - C8, and D1 - D8). The inputs work in line to about 15V having positive or negative logic inputs. The +5V supply is produced on the module and later separated from the PLC backplane. One can decide to power the inputs from the internal supply rather than powering them with an external user issued supply. This can be made possible by Setting up jumpers on the right pins on the I/O connector. If this internal supply is used to power the inputs, more loading will be put on the PLC's +5V power supply in case an internal supply is utilized to power the inputs. Opto-couplers found on the module offers and supports backplane isolation of 1500 volts between field side and logic side and 250 volts between the four classes. In addition, no faults diagnostics are noted on the power supply. IC693MDL654 consumes an internal power of 195 mA from +5V bus on backplane.
The module consists of LED indicators listed as; A1 - A8, B1 - B8, C1 - C8, D1 - D8 located at the top of the module. The indicator provides ON/OFF status of every input point. The input current is 3.0 mA (typical ON current at 5 VDC) and 8.5 mA (typical ON current at 12 VDC). IC693MDL654 is of 32-point input design which uses 32 bits of discrete %I input data. It can be placed on an I/O port on a 5 or 10-slot baseplate in a Series 90-30 PLC system. Current from an input point leads to logic 1 within the input status table. Rated Voltage for IC693MDL654 is 5 to 12 volts DC, Positive or Negative Logic while the Input Voltage Ranges from 0 to 15 volts DC Links to the input circuits are created from the user’s input devices to two male (pin-type) 24-pin connectors (Fujitsu FCN-365P024-AU) placed on the front of the module. This link placed on the front viewpoint borders between class A and B.The another one on the left side borders class C and D. A cable that has a female connector on a single end with wires which is stripped enhances field wiring to field devices from modules connectors.
|Rated Voltage:||5 to 12 volts DC|
|# of Inputs:||32|
|Input Current:||3.0 mA @ 5 VDC, 8.5 mA @ 12 VDC|
|Input Voltage Range:||0 to 15 volts DC|
PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.