PDF Electric and Supply



Buy NowIC693MDL731
IC693MDL731 Wiring

Rated 4.8/5 based on 9 ratings.
  • IC693MDL731
  • IC693MDL731 Wiring

Product Description

The GE Fanuc IC693MDL731 is a 12/24 volt DC Negative Logic 2 Amp Output module. Part of the Series 90-30 Programmable Logic Controller system, this module is equipped with 8 output points. These points share a single power output terminal. As the IC693MDL731 sinks current from the loads to the user common or negative power bus, the module has negative logic characteristics. Its output characteristics enable pairing with certain load devices that the user supplies. For example, it is possible to operate this module with various types of solenoids and motor starters as well as indicators. To do so, these devices need to be hooked up between the module’s output and the positive power bus. The user can then provide an external power supply to operate the devices.

Like many similar units in the 90-30 family, the IC693MDL731 has an LED block. There are 16 indicators, arranged in two separate rows – A1 and B1. Each has 8 LEDs but this module only uses A1 as it only has 8 output points. A blow fuse indicator LED is also present. This glows red whenever any fuse in the module is blown. There are two fuses in the unit, each of them a 5 amp fuse. One protects outputs A1 to A4 while the other fuse protects A5 to A8.  These fuses are connected electrically to a single shared common. The user may install this 2 Amp Output module the baseplate of a Series 90-30 system. There is a blue-colored strip on the end of the insert close to the door of the IC693MDL731. This indicates that the unit is low-voltage. 

Technical Specifications

Rated Voltage: 12/24 volts DC
# of Outputs: 8
Freq: n/a
Output Load: 2.0 Amps per point
Output Voltage Range:   12 to 24 volts DC
DC Power: Yes


GE Intelligent Platforms / GE Fanuc GE Series 90-30

SKU 2175211  UPC 011335477672

Part Number: IC693MDL731 / ic693mdl731
Mfr/Brand Name: GE Automation
Mfr Number: IC693MDL731 / ic693mdl731
Type: 12/24 volts DC Neg. Logic 2 Amp Output Module, 8 Output Pts

Technical Specifications

      Troubleshooting and Product Information for IC693MDL731

      Download product information, troubleshooting guides and operation manuals to get your PLC operational.

      New IC693MDL731
      Price: $732
      6 In Stock
      1 Year Warranty

      *Need a Specific Revision?

      New Surplus IC693MDL731
      Price: $409
      3 In Stock
      3 Year PDF Supply Warranty

      *What is New Surplus?

      Reman IC693MDL731
      Price: $165
      In Stock

      2 Year PDF Supply Warranty

      *What is Remanufactured?

      Repair Your IC693MDL731
      Price: $100
      1 Year PDF Supply Warranty
      Call For Assistance

      Other IC693MDL731

      Available Revisions:

      Confirm Your Revision Number

      1C693MDL731 , GEFIC693MDL731 , CIMIC693MDL731



      Rated Voltage

      12/24 volts DC

      Output Voltage Range

      12 to 24 volts DC (+20%, –15%)

      Outputs per Module

      8 (one group of eight outputs)


      1500 volts between field side and logic side

      Output Current t

      2 amps maximum per point

      4 amps maximum per fuse at 50 ° C  (122° F)


      2 amps maximum per fuse at 60 ° C (140° F)

      Output Characteristics


      Output Voltage Drop

      0.75 volts maximum

      Off-state Leakage

      1 mA maximum

      On Response Time

      2 ms maximum

      Off Response Time

      2 ms maximum

      Power Consumption

      55 mA (all outputs on) from 5 volt bus on backplane


      Troubleshooting IC693MDL731

      Troubleshooting information is available on IC693MDL731’s website page; it also includes a datasheet user-manual and a wiring diagram.


      Repair your IC693MDL731

      PDF Supply can repair your IC693MDL731 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

      Customer Questions and Answers

      • Question:  What is an IC693MDL731?  Answer:  The IC693MDL731 is a 12/24 volt DC Negative Logic 2 Amp Output module for the GE Fanuc Series 90-30. This module provides 8 output points in 1 group with a common power input terminal for each group.
      • Question:  What is this module designed to have?  Answer:  The IC693MDL731 is designed to have negative logic characteristics so it can source current to the loads from the user common or negative power bus. 
      • Question:  What is the rated voltage of IC6963MDL731?  Answer:  12/24 volts DC
      • Question:  What is the output voltage range of IC693MDL731?  Answer:  12 to 24 volts DC (+20%, -15%)
      • Question:  What kind of power source does this module require?  Answer:  Power to operate field devices must come from an external power supply supplied by the user.
      • Question:  With what are the output characteristics compatible?  Answer:  They are compatible with motor starters, solenoids, and indicators. 
      • Question:  Into what can the IC693MDL731 be installed?  Answer:  The IC693MDL731 can be installed in any I/O slot of a 5 or 10 baseplate in a Series 90-30 PLC system.
      • Question:  What should I do if my IC693MDL731 is not working properly?  Answer:  If your IC693MDL731 is not correctly working, then your product may need repair.

      For more information on the IC693MDL731 DC Negative Logic Output Module of the GE 90-30 Series, please see the Datasheet Manual.

      Need To Order A Specific Revision?

      Give us a call at 1-800-360-6802 or 1-919-535-3180.

      We can help you with your Revision specific needs.

      Free Overnight delivery on orders over $500!

      What is New Surplus?

      These “New Surplus” units are a great cost saving alternative. This product is sealed in the original manufacturer’s packaging with all sub-assemblies and documentation. May indicate older date code. Comes with a PDF Supply 3-year warranty.

      Free Overnight delivery on orders over $500!

      What is Surplus New?

      Surplus New - New unused and includes all sub-assemblies and documentation. Product may ship in manufacturer or PDF Supply packaging. May indicate older date code. Includes a PDF Supply 3 Year Warranty.

      Free Overnight delivery on orders over $500!

      What is Reconditioned?

      Reconditioned products from PDF Supply are a cost-effective alternative to new and obsoleted PLC products. Every part is reconditioned down to the circuit board level and updated to the latest revision. All parts are thoroughly inspected and hand-cleaned before being functionally tested in a fully configured system.

      Our Reconditioned Products always come with a PDF Supply 2-Year Warranty.

      Free Overnight delivery on orders over $500!

      What is a Verified Substitute?

      A verified substitute new product is a "drop in" replacement designed with identical specifications as the OEM product. It will meet all electrical and dimensional charactertics at a substanstially reduced price.

      Free Overnight delivery on orders over $500!

      Download Lastest Documentation

      Please visit this manufacturer's website to download the lastest manuals and datasheets.

      Lowest Price Guarantee

      We stand behind our prices with a lowest price guarantee. If you find a legacy GE PLC part advertised for less on an authorized GE PLC distributor website, simply contact us and send us a link to the lower advertised price. We will match that price and ship overnight FREE. The item must be in stock, in similar condition and be able to ship same day.

      Free Shipping

      FREE Overnight Delivery for Continental US orders over $500!

      FREE Ground Delivery for Continental US orders under $500!

      US orders placed Monday - Friday before 5pm EST will ship same day.

      Canada/Mexico orders placed Monday - Friday before 3:30pm EST will ship same day.

      International orders will ship the following business day.