GE / IP FANUC Series 90/30 In Stock
IC693MDL732 is a 0.5 Amp positive Logic output module that delivers 12/24V of voltage with 8 output points per group in a group of 8, sharing a common power output terminal. It’s based on the 90-30 series PLC system. Maximum output per point is 0.5 Amp and a maximum of 2 Amps per common power output. This Output module was tailored to source current to the loads from the user common or positive power bus. Thanks to its design, the module offers unrivalled versatility. The output characteristics are compatible with a myriad of load devices such as solenoids, motor starters and indicators. These output characteristics include ON and OFF response maximum time of 2ms, off-state leakage of 1mA maximum, output voltage drop of 1 volt maximum and an in-rush current 4.78 Amps for 10ms. Power for operation of the field devices is supplied by the user.
At the top of the module, you’ll locate LED indicators which are used to display the ON / OFF status of each point The LED block comprises two horizontal rows with each row having 8 green LEDs. The top is labelled row is labelled A1 to A8 (first 8 points) and the bottom labelled from A9 right through A16 (Another 8 points). Be sure to find an insert that goes between the inside and outside surface of the hinged door. The circuit wiring information is found towards the inside of the module when the hinged door is shut. The circuit identification information can be recorded on the outside surface. The outside left edge of the insert is coded blue to indicate a low-voltage module. The IC693MDL732 output module however, does not have fuses. It can be installed in any I/O slot of 5 0r 10-slot baseplate in the 90-30 PLC system.
|Rated Voltage:||12/24 volts DC|
|# of Outputs:||8|
|Output Load:||0.5 Amps|
|Output Voltage Range:||12 to 24 volts DC|
Rated Voltage 12/24 volts DC
Output Voltage Range 12 to 24 volts DC (+20%, –15%)
Outputs per Module 8 (one group of eight outputs)
Isolation 1500 volts between field side and logic side
Output Current 0.5 amps maximum per point
2 amps maximum per common
Inrush Current 4.78 amps for 10 ms
Output Voltage Drop 1 volt maximum
Off-state Leakage 1 mA maximum
On Response Time 2 ms maximum
Off Response Time 2 ms maximum
Power Consumption 50 mA (all outputs on) from 5 volt bus on backplane
Repair your IC693MDL732
PDF Supply can repair your IC693MDL732 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
For more information on the IC693MDL732 DC Positive Logic Output Module of the GE 90-30 Series, please see the Datasheet Manual.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.