GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
IC693MDL750
SKU 2177135 UPC 0154380916472
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
MSRP $764
Product Description
The GE Fanuc 90-30 IC693MDL750 is a 12/24 negative logic DC output module. This model possesses negative logic characteristic so that the current drops from loads to the negative bus power terminal or the common user. The output device is placed in between the output module and the power bus. The rated voltage required for the IC693MDL750 module is 12/24 volts DC, and the output current is a maximum of 0.3 amps per point and a maximum of 2 amps per common with a 140°F operating temperature.
The IC693MDL750 hosts a 50 -pin connector setup on its front end to make connections from output circuits to the user's output devices. Also, it is equipped with 32 output points separated into four equal groups with eight output points, each group has common output terminals.
The field devices are operated from the external power supply by the user which can be wired to the IC693MD750 either directly or by using Weidmuller terminal block. The direct wiring method consists of the female connector at its module end and stripped wires on another end. The terminal block utilizes GE Fanuc’s cables with two connectors at each end; which connects the DIL-rail placed on the terminal block with the module connector on the IC693MD750.
The C693MD750 is compatible with load devices such as solenoids, indicators, and motor starters. There are no LED indicators on this module. However, if the user wishes to know the status of each circuit, he can set up a module with LED indicators in any of the input or output slots in 90-30 Programmable logic control system.
Technical Specifications
| Rated Voltage: | 12/24 volts DC |
| # of Outputs: | 32 |
| Freq: | n/a |
| Output Current: | 0.3 A per point |
| Output Voltage Range: | 12 to 24 volts DC (+20%, -15%) |
| DC Power: | Yes |
Technical Information
Specifications
|
Rated Voltage |
12/24 volts DC |
|
Output Voltage Range |
12 to 24 volts DC (+20%, –15%) |
|
Outputs per Module |
32 (four groups of eight outputs each) |
|
Isolation |
1500 volts between field side and logic side |
|
Output Current |
0.3 amps maximum per point 2 amps maximum per common at 60 ï‚°C (140ï‚°F) |
|
Output Characteristics |
|
|
Output Voltage Drop |
0.24 volts maximum |
|
Off-state Leakage |
0.1 mA maximum |
|
On Response Time |
2 ms maximum |
|
Off Response Time |
2 ms maximum |
|
Internal Power Consumption |
21 mA (all outputs on) from 5 volt bus on backplane |
Troubleshooting
Troubleshooting IC693MDL750
Troubleshooting information is available on IC693MDL750’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693MDL750
PDF Supply can repair your IC693MDL750 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC693MDL750? Answer: The IC693MDL750 is a 12/24 volt DC Negative Logic 0.3 Amp Output module for the GE Fanuc Series 90-30. This module provides 32 output points in 4 groups of 8 with two common pins for each group.
- Question: What is the rated voltage of IC6963MDL750? Answer: 12/24 volts DC
- Question: What is the output voltage range of IC693MDL750? Answer: 12 to 24 volts DC (+20%, -15%)
- Question: What kind of power source does this module require? Answer: Power to operate the field devices must be supplied by the user.
- Question: With what are the output characteristics compatible? Answer: They are compatible with motor starters, solenoids, and indicators.
- Question: Into what can the IC693MDL750 be installed? Answer: The IC693MDL750 can be installed in any I/O slot of a 5 or 10 baseplate in a Series 90-30 PLC system.
- Question: What should I do if my IC693MDL750 is not working properly? Answer: If your IC693MDL750 is not correctly working, then your product may need repair.
For more information on the IC693MDL750 DC Negative Logic Output Module of the GE 90-30 Series, please see the Datasheet Manual.
Common related search terms: Buy, Datasheet, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
Adding Items to Cart
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.