GE / IP FANUC Series 90/30 In Stock
Preowned
PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson
Other Available Revisions for the IC693MDL753 IC693MDL753AIC693MDL753BIC693MDL753CIC693MDL753-CAIC693MDL753DIC693MDL753EIC693MDL753FIC693MDL753GIC693MDL753HIC693MDL753JIC693MDL753KIC693MDL753LIC693MDL753-LTIC693MDL753MIC693MDL753-RR
The GE Fanuc IC693MDL753 is 12/24 volt DC, 0.5A Positive Logic Output module. Designed for the Series 90-30 Programmable Logic Controller, this output module is equipped with 32 discrete outputs. These outputs have been set up in four separate isolated groups of eight. Each group has its own dedicated common. As they are sourcing type outputs, they switch the loads on the positive side of the power supply to supply current to the load. The outputs on this module are capable of switching loads from +12 through +24 VDC (+20%, –15%). They can also source current to a maximum value of 0.5 amps per point. In the group commons, there are user I/O connectors. Each connector has two pins, which can handle up to 3A current. When the user is connecting the group common, it is advised that connections be made to both pins.
Each group of output points can drive different loads, however there must be an external power source provided by the user to make this happen. There are opto-couplers on this module, which provide backplane isolation between the field side and logic side. Like many other output modules by GE Fanuc, this one is compatible with the Series 90-30 PLC system. To implement it, users can install it in any I/O slot of the baseplate. On the front of the module, there are two male 24-pin connectors. These allow for connections to the user load devices. Output groups A and B have an interface provided by the connector on the right side, while groups C and D use the connector on the left side.
Rated Voltage: | 12/24 volts DC |
# of Outputs: | 32 |
Freq: | n/a |
Output Current: | 0.5 A per point |
Output Voltage Range: | 10.2 to 28.8 volts DC |
DC Power: | Yes |
Rated Voltage |
12 through 24 volts DC, positive logic 10.2 to 28.8 volts DC 32 (four groups of eight outputs each) 1500 volts between field side and logic side 250 volts between groups 0.5 amps per point with 4 amps maximum per group and 3 amps maximum per group common pin
5.4 amps for 10 ms 0.3 volts DC 0.1 mA maximum 0.5 ms maximum 0.5 ms maximum 260 mA (maximum) from 5 volt bus on backplane; (13 mA + 3 mA/point ON + 4.7 mA/LED) 16.5 mA (maximum) per group from user supply @ 24 VDC and all eight outputs in group ON 9.6 mA (maximum) per group from user supply @ 12 VDC and all eight outputs in group ON |
Output Voltage Range |
|
Outputs per Module |
|
Isolation |
|
Output Current |
|
Output Characteristics |
|
Inrush Current |
|
On-state Voltage Drop |
|
Off-state Leakage Current |
|
On Response Time |
|
Off Response Time |
|
Internal Power Consumption |
Troubleshooting IC693MDL753
Troubleshooting information is available on IC693MDL753’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693MDL753
PDF Supply can repair your IC693MDL753 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
For more information on the IC693MDL753 DC Positive Logic Output Module of the GE 90-30 Series, please see the Datasheet Manual.
Common related search terms: BuyDatasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.