GE / IP FANUC Series 90/30 In Stock
SKU 2170352 UPC 0810410022789
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The GE Fanuc IC693MDL754 is a positive logic output module. It is available with a voltage rate of 12/24 V from a DC supply. Each module comes with 32 output points. These points groups into two separate 16 output points. Each group finds its utilization for driving different loads. If one group drives a 12V load from DC supply, then the other group will drive the 24V load. The output current from this module is 0.75 A per each point. This module also consumes the power of 300 mA from 5V bus situated on its backplane. The IC693MDL754 has an auto-recovery feature. This feature gives protection to the module against the short circuit, over temperature, and current.
The IC693MDL754 module has 32 yellow/green LEDs. They indicate the switching status of each output point. Green LEDs indicate that the output points are switched on. Otherwise, if the output points have an off status, then there are no indications from the LEDs. Yellow LEDs indicate whenever there is a fault in the output points. The IC693MDL754 module consists of a DIP switch. They are located on its rear end. The DIP switch carries out the default operation for its output circuits. Also, this module can send 16 bits status data into the CPU. The load 30V DC causes the start of thermal de-rating of the output. At an ambient temperature above 42°C, the output of this module is de-rated. The response time for switching on and off of the module is 0.5 msec.
|Rated Voltage:||12/24 volts DC|
|# of Outputs:||32|
|Output Current:||0.75 A per point with ESCP|
|Output Voltage Range:||12 to 24 volts DC (+20%, -15%)|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.