GE / IP FANUC Series 90/30 In Stock
The IC693MDL916 is a 16-Point, 4 Amp, Isolated Relay Output module from the GE Fanuc Series 90-30. This module provides 16 Form A relays for controlling output loads provided by the user. The 16 output points are divided into two groups of eight with a common power output terminal for each group. The IC693MDL916 is characterized by four amps isolated relay with a normally opened terminal (NO). The DC voltage range is from 5-125 VDC (5/24/125 VDC nominal), whereas voltage ranges from 5-250 VAC (120-240 VAC nominal) at a frequency of 47-63 Hz. The maximum internal power used from the backplane is 300 mA at 5 VDC. The normal response time for this module is 10ms. The load current required is 4.0 A per point but only one point per common.
The output module IC693MDL916 requires a high-density terminal block. Hence, the isolated relay and the requirement of high-density terminal makes this module unique. When switching inductive loads, the relay contact point approaches resistive contact points. At this point, the suppression circuit application activates. The suppression circuit will be different for both AC and DC supply. The 1A, 200V diode is used in DC typical suppression, which is an industrial standard. The resistor and capacitor are standard components for AC typical suppression.
Rated Voltage: | 5/24/125 volts DC, 120/240 volts AC |
# of Outputs: | 16 (isolated) |
Freq: | 50/60Hz (A/C only) |
Output Current: | 4A per point max |
Output Voltage Range: | 5 to 125VDC, 5 to 250 VAC |
Power Consumption: | 300mA from 5V bus |
Outputs per Module External Power Supply Isolation Field to Backplane and to Frame Ground, Group to Group Power Consumption
Thermal Derating |
16 isolated Form A relay outputs 0 – 125VDC (5/24/125 VDC nominal) 0 – 250VAC (47 to 63 Hz), 120-240VAC nominal 250 VAC continuous; 1500 VAC for 1 minute. 300mA at 5VDC from backplane maximum (all outputs ON) 150mA at 24VDC from backplane relay power (all outputs ON) See next page |
Output Characteristics |
|
Output Voltage |
5 – 125VDC (5/24/125 VDC nominal) |
|
5 – 250VAC (47 to 63 Hz), 120-240VAC nominal |
Output Current |
10mA per point minimum |
|
4A for 5-250VAC maximum (resistive or general purpose) |
|
4A for 5-30VDC maximum (resistive) |
|
200mA for 125VDC (maximum resistive) |
|
2A pilot duty per output (5 to 30VDC, 5 to 250VAC) |
|
2A lamp load per output (5 to 30VDC, 5 to 250VAC) |
Output Voltage Drop |
0.3VDC maximum |
Output Leakage Current |
Not Applicable (open contact) |
Response Times (On/Off) |
10ms maximum (At nominal voltage excluding contact bounce) |
Switching Frequency |
20 cycles per minute maximum |
Protection |
None. External snubbers may be applied if necessary |
Relay Contact Life |
See chart on the next page |
Diagnostic Information |
Field side terminal block presence detection reported to CPU (for RX3i |
|
only) |
Troubleshooting IC694MDL916
Troubleshooting information is available on IC693MDL916's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693MDL916
PDF Supply can repair your IC693MDL916 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
For more information on the IC693MDL916 16-Point, 4 Amp, Relay, Output Module of the GE Fanuc Series 90-30, please see the Datasheet User-Manual.
Common related search terms: Buy, Datasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.