GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
IC693MDR390
SKU 2170411 UPC 021559705581
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
MSRP $833
Product Description
The IC693MDR390, manufactured by GE Fanuc, is a 24 volts DC Input/Output Relay module. This module provides 8 inputs and 1 common power input terminal and 8 normally-open relay circuits in the same module. The input circuits are compatible with either negative or positive characteristics in which they source or sink between input devices and the common user. These input circuits are arranged into one group for every 8 inputs. The circuits for relay output are arranged as two groups having four circuits for both. There is a common terminal for power output per group. Input characteristics are compatible with a huge range of devices. Proximity switches, push buttons, and limit switches are some of the devices compatible with the IC693MDR390 that may be useful for the user’s system. Field devices operate on user-supplied power.
The user provided output loads are controlled by relay circuits that are normally-open. Every output has two amps of switching capacity output. Relay outputs can control a wide variety of load devices supplied by the user, such as indicators, motors, and solenoids. The backplane has a +24 volts DC bus which provides the power for the relay circuits, which are internal. The field devices operate on AC source or DC source for power which must be supplied by the user. This module has no fuses.
Technical Specifications
| Rated Voltage: | Inputs: 24 volts DC. Outputs: 24VDC or 120/240 VAC |
| # of Outputs: | 16 (8 Inputs and 8 Outputs) |
| Freq: | 50/60 Hz with AC |
| Output Current: | 2 Amps per circuit, 4 amps per common |
| Input Current: | 7.5 mA at rated voltage |
| Output Voltage Range: | 5 to 30 volts DC, 5 to 250 volts AC |
Technical Information
|
Inputs |
|
|
Rated Voltage |
24 volts DC |
|
Input Voltage range |
–30 to +32 volts DC |
|
Inputs per Module |
8 (one group of eight inputs) |
|
Isolation |
1500 volts RMS between field and logic side |
|
500 volts RMS between inputs |
|
|
Input Current |
7.5 mA (typical) at rated voltage |
|
Input Characteristics |
|
|
On-State Voltage |
15 to 32 volts DC |
|
Off-State Voltage |
0 to +5 volts DC |
|
On-State Current |
4 mA (minimum) |
|
Off-State Current |
1.5 mA (maximum) |
|
On Response Time |
7 ms typical |
|
Off Response Time |
7 ms typical |
|
Outputs |
|
|
Rated Voltage |
24 VDC, 120/240 VAC |
|
Operating Voltage |
5 to 30 volts DC |
|
5 to 250 volts AC, 50/60 Hz |
|
|
Outputs per Module |
8 (two groups of four outputs each) |
|
Isolation |
1500 volts RMS between field and logic side |
|
500 volts RMS between groups |
|
|
Maximum Load 1 |
2 amps maximum per output |
|
4 amps maximum per common |
|
|
Minimum Load |
10 mA |
|
Maximum Inrush |
5 amps |
|
On Response Time |
15 ms maximum |
|
Off Response Time |
15 ms maximum |
|
Internal Power Consumption |
80 mA (all I/O on) from +5V backplane bus |
|
70 mA (all outputs on) from relay +24V backplane bus |
|
|
1 Maximum load current is dependent on operating voltage as shown in the following table. |
|
Troubleshooting
Troubleshooting IC693MDR390
Troubleshooting information is available on IC693MDR390’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693MDR390
PDF Supply can repair your IC693MDR390 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC693MDR390? Answer: The IC693MDR390 is a 2 Amp Relay Output module for the GE Fanuc Series 90-30. It provides 8 input points with one common power input terminal and 8 normally-open relay circuits in the same module. The input circuits are arranged in 1 group of 8 inputs. The relay output points are arranged in 2 groups of 4 points each. Each group has a common power output terminal.
- Question: What is the output switching capacity for each output circuit? Answer: 2 amps.
- Question: What can the relay outputs control? Answer: They can control motor starters, solenoids, and indicators.
- Question: What kind of power does the IC693MDR390 use? Answer: Power to operate the field devices must be supplied by the user and be either AC or DC power.
- Question: Are there fuses on this module? Answer: No
- Question: What is the rated voltage for IC693MDR390? Answer: Inputs: 24 volts DC or Outputs: 24VDC 120/240 volts AC
- Question: What is the operating voltage for IC693MDR390? Answer: 5 to 30 volts DC or 5 to 250 volts AC, 50/60 Hz
- Question: What should I do if my IC693MDR390 is not working correctly? Answer: The product may need repair if your IC693MDR390 is not working correctly.
For more information on the IC693MDR390 Relay Output Module of the GE 90-30 Series, please see the Datasheet Manual.
|
Release |
Date |
Comments |
|
IC693MDR390D |
May 2015 |
Change in fab color from Green to Blue. No change in form-fit-functionality. |
|
IC694MDR390C |
Jan 2015 |
Updated modules are RoHS converted product with applicable exemptions. |
|
IC694MDR390B |
Aug 2013 |
Hardware update for improved manufacturability. No changes to features, functions or compatibility. |
|
IC694MDR390A |
June 2012 |
Initial release of RX3i version (with blue housing).. |
|
IC693MDR390C |
Aug 2008 |
Updated agency compliance data |
Common related search terms: Buy, Datasheet, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
Adding Items to Cart
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.