1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com
GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
sales@pdfsupply.com
IC693PWR325
SKU 0 UPC 0799705805965
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
MSRP $1094
Common misspellings:
- 1C693PWR325
- lC693PWR325
- IC693PWR325
Product Description
The IC693PWR325 is a GE Fanuc 90-30 series input power supply unit weighing 2 pounds. The power supply is designed for nominal voltage inputs of 24 VDC or 48 VDC at a power rating of 30 Watts. The power supply can accept an input voltage range from 18 VDC to 56 VDC.
The power supply delivers an output voltage of +5 VDC & +24 VDC relay power output that powers the circuits on Alspa C80–35 Output Relay modules and isolated 24 VDC output. The isolated 24 VDC can be used to power some input modules.
Technical Specifications
| Nominal Rated Voltage: | 24 or 48 volts DC |
| Input Voltage Range: | 21 to 56 volts DC |
| Input Power: | 50 W at full power |
| Load Capacity: | 30 Watts |
| Location on Baseplates: | Leftmost Slot |
| Communication: | RS 485 Serial Port |
Technical Information
Specifications
|
Nominal Rated Voltage Input Voltage Range Start Run |
24 or 48 VDC
21 to 56 VDC 18 to 56 VDC |
|
Input Power Inrush Current |
50 watts maximum at full load 4A peak, 100 ms maximum |
|
Output Power |
5 VDC: 15 watts maximum 24 VDC Relay: 15 watts maximum 24 VDC Isolated: 20 watts maximum NOTE: 30 watts maximum total (all three outputs) |
|
Output Voltage |
5 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal) 24 VDC Relay: 24 to 28 VDC 24 VDC Isolated: 21.5 VDC to 28 VDC |
|
Protective Limits Overvoltage: Overcurrent; |
5 VDC output: 6.4 to 7 V 5 VDC output: 4 A maximum |
|
Holdup Time: |
14 ms minimum |
|
Standards |
Refer to data sheet, GFK-0867B, or later version for product standards, and general specifications. |
Troubleshooting
Troubleshooting IC693PWR325
Troubleshooting information is available on IC693PWR325’s website page; it also includes a datasheet user-manual.
Repair your IC693PWR325
PDF Supply can repair your IC693PWR325 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC693PWR325? Answer: The IC693PWR325 is a Standard Power Supply. This module is a 30 watt output supply designed for 24 VDC or 48 VDC nominal inputs. It will accept an input voltage range from 18 VDC to 56 VDC. Although it is capable of maintaining all outputs (within specifications) with input voltages as low as 18VDC, it will not start with initial input voltages of less than 21 VDC.
- Question: How many outputs does this power supply provide? Answer: The IC693PWR325 provides 3 outputs.
- Question: What are those outputs? Answer:
- +5 VDC output
- +24 VDC "Relay" power output, which provides power to circuits on Series 90-30 Output Relay modules.
- "Isolated" +24 VDC, which is used internally by some modules and can also be used to provide external power for 24 VDC Input modules.
- Question: What is the load capacity for IC693PWR325? Answer: 30 watts
- Question: How many terminals does this power supply have? Answer: In previous versions of this power supply, it had 5 terminals on the terminal block. The new version has six terminals (It is functionally the same.). The change was made to conform to European EC requirements.
- Question: Where should the power supplies be installed? Answer: Power supplies must be installed in the leftmost slot in all baseplates.
- Question: What does it mean when the OK light is green? Answer: It is referring to the CPU. If the OK light is green it means that the CPU has reported back that it is in a fully functional mode.
- Question: How can I tell if my IC693PWR325 is not working? Answer: If your PWR or OK light is not on, if the power supply is excessively loud, if the PS PORT is not blinking, or if your RUN light does not come on when you have the module running then your product may need repair.
For more information on the IC693PWR325 Standard Power Supply Module of the GE 90-30 Series, please see the Datasheet Manual.
Common related search terms: Battery, Buy, Datasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
