GE / IP FANUC Series 90/30 In Stock
SKU 2172147 UPC 0799705798588
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC693PWR330 IC693PWR330AIC693PWR330BIC693PWR330CIC693PWR330-CAIC693PWR330DIC693PWR330EIC693PWR330FIC693PWR330GIC693PWR330HIC693PWR330JIC693PWR330KIC693PWR330-LTIC693PWR330-RR
|Description||High-Capacity Power Supply|
|Operating Voltage||85 to 264 Volts AC, or 100 to 300 Volts DC|
|Power Rating||30 Watts|
|Protection Current Limit||7 Amps|
|Outputs||5 Volts DC, 24 Volts DC Relay, and 24 Volts DC Isolated|
|Location on Baseplates||Leftmost Slot|
|Communication||RS-485 Serial Port|
|Terminals||3 Power Terminals|
IC693PWR330 is a High Capacity Power Supply with 30 watts output and 120/240 VAC/125 VDC Input. There are applications that might need high +5V current capacity which may not be present with the standard supply(IC693PWR321).Therefore, this high capacity power supply permits each one of the 30 watts to be utilized from the +5V supply. IC693PWR330 can function from an input voltage source within the range of 85 to 264 VAC or 100 to 300 VDC. This power supply offers a +5 VDC output, +24 VDC Relay power outputs which distribute power to circuits on Series 90-30 Output Relay modules. An Isolated +24 VDC utilized internally by some modules may be used to offer external power for 24 VDC Input modules. IC693PWR330 has field Wiring Connections for the AC/DC Input Power Supplies. These two power supplies consist of 6 terminals used for user link up. These links include; AC Power Source, 20 VAC power source, and ground wires from the 240 VAC power source. They are attached to the system via the top 3 terminals on the front of the power supply. Their sensitivity to an AC/DC input power supply is normally low.
IC693PWR330 contains input overvoltage protection devices which have an internal connection on pin 4 found on the user terminal strip. This pin is linked to pin 3 with the offered strapped jumper that is well set up at the company. The strapped jumper can be removed to make the character nonfunctional in case overvoltage protection is not needed from both pins 3 and 4. It also requires overcurrent protection which is offered by the 5V logic output which is electronically limited to 3.5 amps (7 amps for high capacity supplies). Whenever there is excess load it is sensed on the inside which may lead to shutting down of the power. An internal fuse in the input acts as a power back up in case of such occurrences. It also safeguards the power supply from internal supply faults.
|Nominal Rated Voltage:||120/240 VAC or 125 VDC|
|Input Voltage Range:||85 to 264 VAC or 100 to 300 VDC|
|Input Power:||100VA with VAC or 50 W with VDC|
|Load Capacity:||30 Watts|
|Location on Baseplates:||Leftmost Slot|
|Communication:||RS 485 Serial Port|
The GE Fanuc IC693PWR330 High-Capacity Power Supply is a modular power supply module for the Series 90-30 PLC control system. The GE Fanuc Series 90-30 power supplies are modularly designed to allow for direct plugging into the left slot of all the Series 90-30 baseplates, thus reducing installation time and costs. The IC693PWR330 Power Supply belongs to the high capacity AC/DC input series and it is capable of operating from an input voltage source in the range of 85 Volts AC to 264 Volts AC or 100 Volts DC to 300 Volts DC. The IC693PWR330 Power Supply is designed for applications requiring more than 5 Volts DC and more than the standard IC693PWR321 Power Supply Module can provide, and it allows all the 30 Watts output capacity to be used from the +5 Volts DC rated supply.
The GE Fanuc IC693PWR330 Power Supply has a standard 5 Volts DC output capacity with 30 Watts of total output power. It also has a 24 Volts DC relay power output with 15 Watts of power, which provides power to circuits on Series 90-30 output relay modules, and an isolated 24 Volts DC output with 20 Watts of total power, which is used internally by some I/O modules and can also be used to provide external power for 24 Volts DC input modules. The IC693PWR330 Power Supply has a nominal input voltage rating of 120/240 Volts AC or 125 Volts DC, and an acceptable operating voltage range of 85 to 264 Volts AC or 100 to 300 Volts DC. The IC693PWR330 Power Supply has a minimum hold-up time of 20 milliseconds and a maximum overcurrent protection limit of 7 Amps at 5 Volts DC output.
Nominal Rated Voltage Input Voltage Range
120/240 VAC or 125 VDC
85 to 264 VAC
100 to 300 VDC
(Maximum with Full Load)
100 VA with VAC Input 50 W with VDC Input
4A peak, 250 ms maximum
5 VDC: 30 watts maximum
24 VDC Relay: 15 watts maximum
24 VDC Isolated: 20 watts maximum
NOTE: 30 watts maximum total (all three outputs)
5 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal)
24 VDC Relay: 24 to 28 VDC
24 VDC Isolated: 21.5 VDC to 28 VDC
Protective Limits Overvoltage: Overcurrent:
5 VDC output: 6.4 to 7 V
5 VDC output: 7 A maximum
20 ms minimum
Troubleshooting information is available on IC693PWR330’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693PWR330
PDF Supply can repair your IC693PWR330 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
For more information on the IC693PWR330 High Capacity Power Supply Module of the GE 90-30 Series, please see the Datasheet Manual.
The IC693PWR330 is a high capacity power supply for the GE Series 90-30 product family. It enables this product family to house a large number of modules in a rack. This power supply allows 120/240 VAC with a 30 watt output. This module is ideal for use in power plants that also require 125vdc input. The alternative IC693PWR321 does not allow the 30 watt power to be allocated between modules and hence will not support a large number of high power modules.
Common related search terms: BatteryBuy, Datasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.