1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com
GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
sales@pdfsupply.com
IC693PWR332
SKU 2176238 UPC 0799705798564
MSRP $1204
Common misspellings:
- 1C693PWR332
- lC693PWR332
- IC693PWR332
Product Description
The IC693PWR332 is a High Capacity Power Supply for GE Fanuc series 90-30 PLCs. Its power is 30 Watts and is designed for wide range supply. Its nominal input is 12 VDC, but the actual input can vary from 9.6 to 15 VDC. Instead of a single output, it has three different outputs: one +5VDC for CPU inputs or outputs, one +24V Relay output for output relay modules, and an isolated +24VDC supply for internal or external use in modules.
The user terminal strip of the IC693PWR332 High Capacity Power Supply include DC input, ground, and a +24 VDC output. DC input power is connected at the top of supply’s terminal strip. There is system ground for overvoltage protection and +24 VDC output for I/O modules. The power supply also deploys a CPU RS-485 serial port for a computer, handheld programmer, or serial device. Backplane or internal connections include +24 VDC isolated and relay connections, a +5VDC connection, and ground.
To determine the exact input power for the IC693PWR332 High Capacity Power Supply, a series of steps must be followed. First examine the input power needed by all modules in their specifications. Add those together and multiply the total by 1.5. This number is the total of the input power needed. To find the current’s input value, divide the input power by the voltage of the source power. If voltage is less, current will be more; however, everything will work with only a 10 to 20 percent alteration in current and voltage.
The IC693PWR332 High Capacity Power Supply has four LEDs. The PWR labeled LED has a green light when a correct power supply is connected. If the green light is not on, power supply is faulty or not connected. The second LED has the label OK, which is also green when the PLC is working properly. The third LED named RUN indicates that the PLC is in RUN mode.
Technical Specifications
| Nominal Rated Voltage: | 12 volts DC |
| Input Voltage Range: | 9.6 to 15 volts DC |
| Input Power: | 50 W at full power |
| Load Capacity: | 30 Watts |
| Location on Baseplates: | Leftmost Slot |
| Communication: | RS 485 Serial Port |
Technical Information
Specifications
|
Nominal Rated Input Voltage |
12 VDC |
|
Input Voltage Range |
9.6 VDC to 15.0 VDC |
|
Input Power |
50 Watts maximum at full load |
|
Inrush Current |
4 Amps peak, 100 milliseconds maximum |
|
Output Power |
+5 VDC: 30 Watts maximum
+24 VDC Isolated: 20 Watts maximum
+24 VDC Relay: 15 Watts maximum
NOTE: 30 Watts maximum total of all three outputs |
|
Output Voltage |
+5 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC typical)
+24 VDC Isolated: 19.2 to 28.8 VDC
+24 VDC Relay: 19.2 VDC to 28.8 VDC |
|
Protective Limits: |
+5 VDC Output: 6.4 VDC to 7 VCD
+5 VDC Output: 7 amps maximum |
|
Ride-Through Time |
10 milliseconds minimum |
Troubleshooting
Troubleshooting IC693PWR332
Troubleshooting information is available on IC693PWR332’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693PWR332
PDF Supply can repair your IC693PWR332 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC693PWR332? Answer: The IC693PWR332 is a High Capacity Power Supply. This module is a 30 watt wide range supply designed for 12 VDC nominal input power. It will accept an input voltage range from 9.6 VDC to 15 VDC. The specifications for this product are on IC693PWR332's website page.
- Question: How many outputs does this power supply provide? Answer: The IC693PWR332 provides 3 outputs.
- Question: What are those outputs? Answer:
- 5 VDC: 30 watts maximum
- 24 VDC "Relay": 15 watts maximum
- "Isolated" 24 VDC: 20 watts maximum
- Question: What is the load capacity for IC693PWR332? Answer: 30 watts
- Question: What is the input for IC693PWR332? Answer: 9.6 to 15 VDC
- Question: Where should the power supplies be installed? Answer: Power supplies must be installed in the leftmost slot in all baseplates.
- Question: What does it mean when the OK light is green? Answer: It is referring to the CPU. If the OK light is green it means that the CPU has reported back that it is in a fully functional mode.
- Question: How can I tell if my IC693PWR332 is not working? Answer: If your PWR or OK light is not on, if the power supply is excessively loud, if the PS PORT is not blinking, or if your RUN light does not come on when you have the module running then your product may need repair.
For more information on the IC693PWR332 High Capacity Power Supply Module of the GE 90-30 Series, please see the Datasheet Manual.
Common related search terms: Battery, Buy, Datasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
