GE / IP FANUC Series 90/30 In Stock
SKU 2176238 UPC 0799705798564
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The IC693PWR332 is a High Capacity Power Supply for GE Fanuc series 90-30 PLCs. Its power is 30 Watts and is designed for wide range supply. Its nominal input is 12 VDC, but the actual input can vary from 9.6 to 15 VDC. Instead of a single output, it has three different outputs: one +5VDC for CPU inputs or outputs, one +24V Relay output for output relay modules, and an isolated +24VDC supply for internal or external use in modules.
The user terminal strip of the IC693PWR332 High Capacity Power Supply include DC input, ground, and a +24 VDC output. DC input power is connected at the top of supply’s terminal strip. There is system ground for overvoltage protection and +24 VDC output for I/O modules. The power supply also deploys a CPU RS-485 serial port for a computer, handheld programmer, or serial device. Backplane or internal connections include +24 VDC isolated and relay connections, a +5VDC connection, and ground.
To determine the exact input power for the IC693PWR332 High Capacity Power Supply, a series of steps must be followed. First examine the input power needed by all modules in their specifications. Add those together and multiply the total by 1.5. This number is the total of the input power needed. To find the current’s input value, divide the input power by the voltage of the source power. If voltage is less, current will be more; however, everything will work with only a 10 to 20 percent alteration in current and voltage.
The IC693PWR332 High Capacity Power Supply has four LEDs. The PWR labeled LED has a green light when a correct power supply is connected. If the green light is not on, power supply is faulty or not connected. The second LED has the label OK, which is also green when the PLC is working properly. The third LED named RUN indicates that the PLC is in RUN mode. The last LED, named BATT, turns red when the backup lithium battery of the PLC is too low and will result in data loss if power is lost. The battery ensures the contents are maintained. The battery can be changed when power is on by removing the plastic cover at the bottom of the Power Supply faceplate. Normally, the battery LED is off.
|Nominal Rated Voltage:||12 volts DC|
|Input Voltage Range:||9.6 to 15 volts DC|
|Input Power:||50 W at full power|
|Load Capacity:||30 Watts|
|Location on Baseplates:||Leftmost Slot|
|Communication:||RS 485 Serial Port|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.