GE / IP FANUC Series 90/30 In Stock
PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson
The GE Series 90-30 PLC was first introduced in 1988. A joint venture then occurred between GE and Fanuc to form GE Fanuc for many years. As that joint ventured dissolved, the Series 90-30 was then sold under the GE Intelligent Platforms name. Recently Emerson Electric...
The GE Series 90-30 PLC was first introduced in 1988. A joint venture then occurred between GE and Fanuc to form GE Fanuc for many years. As that joint ventured dissolved, the Series 90-30 was then sold under the GE Intelligent Platforms name. Recently Emerson Electric purchased the rights of the GE-IP Automation products. The Series 90-30 has a proven track record as a quality and cost effective control system. The powerful IC693CPU374 CPU processor has built-in Ethernet. The IC693PWR330 power supply is required and should be installed in the IC693CHS391 10 slot rack. This system can be configured as a multi-rack system with AC/DC I/O and a wide variety of analog modules. There are two battery types for these systems. The IC693ACC301 and the high capacity IC693ACC302.
About GE Fanuc Series 90-30
GE Fanuc Series 90-30 are Programmable Logic Controllers (PLC) from GE. These controllers are designed for use in entry level to large and complex applications, as it can accommodate a minimum of Thirty-Two (32) I/Os up to 4096 I/O capacity.
Series 90-30 supports a wide variety of communication protocols such as Genius Bus, World FIP, Profibus-DP, Interbus-S, LonWorks, DeviceNet, Ethernet or SDS protocols. These protocols allow any controller to handle communications between Visualization systems such as Human MAchien Interfaces (HMI), Supervisory Control and Data Acquisition (SCADA), Distributed Control Systems (DCS) and 3rd party software applications. Implementation or Remote I/O systems also uses the same communication protocols, enabling the 90-30 PLC series to maximize I/O capacity and to implement the required automation by the process.
GE Fanuc Series 90-30 is a modular, versatile and scalable PLC Platform. The Controllers are categorized as Entry level Standard Models, Mid-Range Standard Levels and High-Performance Models.
Standard Entry Level models include CPU311, CPU313 and CPU 323 which are embedded into the backplane. CPU 311 supports a total of 160 Discrete I/O, 64 analog input and 32 Analog output with user logic memory of 6Kbytes. CPU313 supports the same I/O capacity however, has an increased memory of 12Kbytes. CPU 323 has a capacity of 320 Discrete I/O, with the same amount of analog I/O and memory size as the CPU 323.
Standard Mid-range controllers include CPU 331 and CPU 341 which are modular type CPUs. Mid-range CPUs all support 1024 Discrete I/O, with CPU 331 capable up to 128 Analog Input and 64 Analog Output while CPU 341 accommodates 1024 Analog Input and 256 Analog output.
All GE Fanuc 90-30 High-Performance CPUs has a capacity of 4096 Discrete Input and Output, accommodates 2048 Analog Input and 512 Analog output with user logic memory ranging from 32Kbytes - 246Kbytes.
The GE Fanuc 90-30 PLC Platform includes a wide selection of I/O module types. This PLC Platforms has 38 Discrete I/O modules, 17 Analog I/O modules and wide selection of specialty modules. Specialty modules include High Speed Counter Module, I/O Processor Module, Programmable Coprocessor Module, Temperature Control Module, Servo Motion Control Modules, PC Coprocessor, Thermocouple, Millivolt/Strain Gauge, Sequence of Event (SOE) Recorder, Isolated Analog, and Modem Module.
The GE Fanuc 90-30 PLC Platform has a Four (4) Level password protection, allowing users and machine manufacturers to implement logic security to prevent unwanted access. Each CPU is capable of online programming edits, comprehensive and easy to understand I/O and CPU diagnostics, Embedded Proportional+Integral+Derivative (PID) controller function block, data move instructions, Indirect addressing and other industry useful function blocks and instructions.
The 90-30 PLC Platform are IEC61131-3 compliant controllers. All controllers support a minimum of Ladder Logic and SFC instruction, with the High-Performance CPUs additionally supports C programming language. This controller platform also comes with open-connectivity support, allowing 3rd party devices and software applications to interact with the controller for implementing a plant wide automation and data integration.
The 90-30 PLCs are compatible with GE Logicmaster 90-30, VersaPro Standard Edition and Proficy Machine Edition Programming software packages.
SERIES 90-30 16 point Input Simulator uses on slot in the base rack requires minimal power
|IC693ACC301||PLC Replacement Battery(qty 2) for all CPU's and PCM modules 2 per package IC693ACC||Buy Now|
GE 90-30 High capacity battery pack. IC693A mounted external IC693AC IC693ACC 90-30
|IC693ACC303||Series 90-30 ACC303 Memory Card 32K for Hand Held Programmer IC693PRG300 IC693A IC693ACC||Buy Now|
|IC693ACC307||GE TERMINATOR||Buy Now|
9030 Blank Filler Module for empty slots keeps dust out of all connectors in the chs racks
CONNECTOR KIT 24 PIN
|IC693ACC335||GE Fanuc Terminal Block Axis for IC693DSM302 or IC693DSM314 90-30 Axis Control Analog Modules||Buy Now|
|IC693ACC336||Terminal Block for 90-30 Auxillary Module for the IC693DSM302 or IC693DSM314 Axid 90-30 Modules||Buy Now|
|IC693ACC337||Terminal Block for Modules: IC693MDL654 IC693MDL655 IC693MDL752 IC693MDL753 - 32 Point Modules||Buy Now|
|IC693CBK001||90-30 Cable Kit for High Density Modules I/O Includes the IC693CBL327 IC693CBL328 - GE Fanuc Cables||Buy Now|
Cable Kit for High Density I/O Modules (includes CBL329 and CBL330)
|IC693CBK003||Cable Kit for High Density I/O Modules (includes CBL331 and CBL332)||Buy Now|
|IC693CBK004||Cable Kit for High Density I/O Modules (includes CBL333 and CBL334)||Buy Now|
|IC693CBL300||Rack Expansion Cable, I/O Expansion, 1 Meter||Buy Now|
|IC693CBL301||Rack Expansion Cable, I/O Expansion, 2 Meters||Buy Now|
|IC693CBL302||I/O Base expansion 50 feet (15 meters), continuous shield with built in terminator.||Buy Now|
|IC693CBL303||Cable, Hand Held Programmer (HHP), 2 Meters||Buy Now|
|IC693CBL304||Cable, Port Expansion, Used With PCM300||Buy Now|
|IC693CBL305||Cable, Port Expansion, Used With PCM301, PCM311, and CMM311||Buy Now|
|IC693CBL310||GE Fanuc||Buy Now|
|IC693CBL311||I/O cable for DSM324 24V I/O or APM I/O to the 44A726268-001 terminal block. 3 meters||Buy Now|
|IC693CBL312||I/O rack expansion cable, 0.15 Meters, Shielded||Buy Now|
|IC693CBL313||I/O rack expansion cable 8 Meters||Buy Now|
|IC693CBL315||GE Fanuc 24 PIN Cable Assembly Three Meters for 90-30 Series Modules Connection - GE Fanuc Cables||Buy Now|
Station Manager Serial Cable for Ethernet TCP/IP
|IC693CBL319||I/O cable for DSM324 24V I/O or APM I/O to the 44A726268-001 terminal block. 1 meter||Buy Now|
|IC693CBL324||I/O cable for DSM302 or DSM314 or DSM324 5V I/O. 1 meter||Buy Now|
|IC693CBL325||I/O cable for DSM302 or DSM314 or DSM324 5V I/O. 3 meters||Buy Now|
|IC693CBL327||Cable, Left Side, One - 24 Pin 90 Degree Connector, 3 Meter.||Buy Now|
|IC693CBL328||Cable, Right Side, One - 24 Pin 90 Degree Connector, 3 Meter||Buy Now|
|IC693CBL329||Cable, Left Side, Two - 24 Pin 90 Degree Connectors, 1 Meter||Buy Now|
|IC693CBL330||Cable, Right Side, Two - 24 Pin 90 Degree Connectors, 1 Meter||Buy Now|
|IC693CBL331||Cable, Left Side, Two - 24 Pin 90 Degree Connectors, 2 Meter||Buy Now|
|IC693CBL332||Cable, Right Side, Two - 24 Pin 90 Degree Connectors, 2 Meter||Buy Now|
|IC693CBL333||Cable, Left Side, Two - 24 Pin 90 Degree Connectors, .5 Meter||Buy Now|
Cable, Right Side, Two - 24 Pin 90 Degree Connectors, .5 Meter
|IC693CMMAAUI||ETHERNET TRANSCIEVER CABLE FOR IC693CMM321-EE & EARLIER REVS||Buy Now|
|IC693MDL635||GE Input module 125 VDC 16 point POS/NEG logic. Module does not have UL certification.||Buy Now|
|IC693MDL652||GE FANUC INPUT MODULE 24VDC 32POINT -/+ 2MS||Buy Now|
|IC693PIF300||GE Fanuc Series 90-30||Buy Now|
|IC693PRG301||IC693PRG 90-30 Hand Held Programmer PRG301 Compatable with 9030 IC693P IC693PG||Buy Now|
|IC693TCM303||Temperature Control Module (TCM) 8 T/C In/ 8 DC Out 18 to 30 volts DC||Buy Now|
The Fiber I/O Terminal Block (FTB) provides an active fiber interface that extends the I/O capability of the IC695PMM335 PACMotion Multi-Axis Motion Controller. The FTB provides a broad range of configurable I/O for the axes on the PMM335, supporting extensive distributed, configurable digital and analog I/O for complex machines.
PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.