GE / IP FANUC Series 90/30 In Stock
PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson
The GE Series 90-30 PLC was first introduced in 1988. A joint venture then occurred between GE and Fanuc to form GE Fanuc for many years. As that joint ventured dissolved, the Series 90-30 was then sold under the GE Intelligent Platforms name. Recently Emerson Electric...
The GE Series 90-30 PLC was first introduced in 1988. A joint venture then occurred between GE and Fanuc to form GE Fanuc for many years. As that joint ventured dissolved, the Series 90-30 was then sold under the GE Intelligent Platforms name. Recently Emerson Electric purchased the rights of the GE-IP Automation products. The Series 90-30 has a proven track record as a quality and cost effective control system. The powerful IC693CPU374 CPU processor has built-in Ethernet. The IC693PWR330 power supply is required and should be installed in the IC693CHS391 10 slot rack. This system can be configured as a multi-rack system with AC/DC I/O and a wide variety of analog modules. There are two battery types for these systems. The IC693ACC301 and the high capacity IC693ACC302.
About GE Fanuc Series 90-30
GE Fanuc Series 90-30 are Programmable Logic Controllers (PLC) from GE. These controllers are designed for use in entry level to large and complex applications, as it can accommodate a minimum of Thirty-Two (32) I/Os up to 4096 I/O capacity.
Series 90-30 supports a wide variety of communication protocols such as Genius Bus, World FIP, Profibus-DP, Interbus-S, LonWorks, DeviceNet, Ethernet or SDS protocols. These protocols allow any controller to handle communications between Visualization systems such as Human MAchien Interfaces (HMI), Supervisory Control and Data Acquisition (SCADA), Distributed Control Systems (DCS) and 3rd party software applications. Implementation or Remote I/O systems also uses the same communication protocols, enabling the 90-30 PLC series to maximize I/O capacity and to implement the required automation by the process.
GE Fanuc Series 90-30 is a modular, versatile and scalable PLC Platform. The Controllers are categorized as Entry level Standard Models, Mid-Range Standard Levels and High-Performance Models.
Standard Entry Level models include CPU311, CPU313 and CPU 323 which are embedded into the backplane. CPU 311 supports a total of 160 Discrete I/O, 64 analog input and 32 Analog output with user logic memory of 6Kbytes. CPU313 supports the same I/O capacity however, has an increased memory of 12Kbytes. CPU 323 has a capacity of 320 Discrete I/O, with the same amount of analog I/O and memory size as the CPU 323.
Standard Mid-range controllers include CPU 331 and CPU 341 which are modular type CPUs. Mid-range CPUs all support 1024 Discrete I/O, with CPU 331 capable up to 128 Analog Input and 64 Analog Output while CPU 341 accommodates 1024 Analog Input and 256 Analog output.
All GE Fanuc 90-30 High-Performance CPUs has a capacity of 4096 Discrete Input and Output, accommodates 2048 Analog Input and 512 Analog output with user logic memory ranging from 32Kbytes - 246Kbytes.
The GE Fanuc 90-30 PLC Platform includes a wide selection of I/O module types. This PLC Platforms has 38 Discrete I/O modules, 17 Analog I/O modules and wide selection of specialty modules. Specialty modules include High Speed Counter Module, I/O Processor Module, Programmable Coprocessor Module, Temperature Control Module, Servo Motion Control Modules, PC Coprocessor, Thermocouple, Millivolt/Strain Gauge, Sequence of Event (SOE) Recorder, Isolated Analog, and Modem Module.
The GE Fanuc 90-30 PLC Platform has a Four (4) Level password protection, allowing users and machine manufacturers to implement logic security to prevent unwanted access. Each CPU is capable of online programming edits, comprehensive and easy to understand I/O and CPU diagnostics, Embedded Proportional+Integral+Derivative (PID) controller function block, data move instructions, Indirect addressing and other industry useful function blocks and instructions.
The 90-30 PLC Platform are IEC61131-3 compliant controllers. All controllers support a minimum of Ladder Logic and SFC instruction, with the High-Performance CPUs additionally supports C programming language. This controller platform also comes with open-connectivity support, allowing 3rd party devices and software applications to interact with the controller for implementing a plant wide automation and data integration.
The 90-30 PLCs are compatible with GE Logicmaster 90-30, VersaPro Standard Edition and Proficy Machine Edition Programming software packages.
31 devices Genius Bus Controller I/O Link master I/O control enhanced by communications
|IC693BEM332||Series 90-30 FIP Remore I/O 2.5mhz Module is Compatable with 90-30 Series IC693BEM332||Buy Now|
|IC693BEM333||GE Fanuc Series 90-30 Remote FIP Interface Module is Compatable with 90-30 IC693BEM333||Buy Now|
|IC693BEM334||Series 90-30 Genius Bus Controller Module is Compatable with 90-30 Series GE Fanuc PLC||Buy Now|
|IC693BEM335||GE Fanuc Series 90-30 FIP Remote I/O 2.5mhz Module is Compatable with 90-30 IC693BEM||Buy Now|
|IC693BEM340||FIP Bus Controller Management of slave devices Monitoring of slave devices IC693BEM||Buy Now|
|IC693BEM341||2.5 MHZ FIP Controller The 2.5MHz version of requires a Release 8.10 version IC693BEM||Buy Now|
|IC693CMM301||Genius Communications configuration completed using Hand_held Programme software IC69||Buy Now|
|IC693CMM302||Communication card, Genius Series 90-30 PLC module, providing Global Data IC693CMM||Buy Now|
|IC693CMM304||GE 90-30 Alstom N80 CMM304 high-performance microcomputer IC693CMM3 GE Fanuc||Buy Now|
|IC693CMM305||Alstom CMM305 ALSPA N80 Enhanced Comm Module Series Six PLC GE Fanuc Serie IC693C||Buy Now|
|IC693CMM311||IC693CMM Communications Card user interfaces for the CMM311 and CMM711 9030||Buy Now|
IC693CMM Modbus Ethernet Interface Transmit Data (TD) and Receive Data (RD) 9030
|IC693DNM200||DeviceNet Master Module allows a PACSystems RX3i to send and receive I/O data IC693DNM||Buy Now|
|IC693DNS201||DeviceNet Slave Module support Get and Set PLC Registers IC693DN IC693DNS Slave Module||Buy Now|
|IC693NIU004||ETHERNET NETWORK INTERFACE GE Fanuc Series 90-30 NIU004 ModuleIC693NI IC693NIU||Buy Now|
Siemens Profibus DP Master Module PBM200 Series 90-30 Module Profi IC693PB IC693PBM
|IC693PBS201||Siemens Profibus DP Slave Module PBS201 Module Series 90-30 Profi Bus IC693PB IC693PBS||Buy Now|
|IC693PCM300||Programmable Coprocessor Module (PCM) 160 KB PCM300 Series 90-30 IC693P IC693PC||Buy Now|
|IC693PCM301||IC693PCM PCM 192 KB Programmable Coprocessor Module (PCM) 301 IC693P IC693PC||Buy Now|
|IC693PCM311||PCM Programmable Coprocessor Module (PCM) 311 Series 90-30 640 KB IC693P IC693PC||Buy Now|
PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.