1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST


GE Fanuc Emerson | Series 90-30

GE Fanuc Emerson | Series 90-30 | Image

PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson

The GE Series 90-30 PLC was first introduced in 1988. A joint venture then occurred between GE and Fanuc to form GE Fanuc for many years. As that joint ventured dissolved, the Series 90-30 was then sold under the GE Intelligent Platforms name. Recently Emerson Electric...

The GE Series 90-30 PLC was first introduced in 1988. A joint venture then occurred between GE and Fanuc to form GE Fanuc for many years. As that joint ventured dissolved, the Series 90-30 was then sold under the GE Intelligent Platforms name. Recently Emerson Electric purchased the rights of the GE-IP Automation products. The Series 90-30 has a proven track record as a quality and cost effective control system. The powerful IC693CPU374 CPU processor has built-in Ethernet. The IC693PWR330 power supply is required and should be installed in the IC693CHS391 10 slot rack. This system can be configured as a multi-rack system with AC/DC I/O and a wide variety of analog modules. There are two battery types for these systems. The IC693ACC301 and the high capacity IC693ACC302.

Read More >

About GE Fanuc Series 90-30
GE Fanuc Series 90-30 are Programmable Logic Controllers (PLC) from GE. These controllers are designed for use in entry level to large and complex applications, as it can accommodate a minimum of Thirty-Two (32) I/Os up to 4096 I/O capacity.

Series 90-30 supports a wide variety of communication protocols such as Genius Bus, World FIP, Profibus-DP, Interbus-S, LonWorks, DeviceNet, Ethernet or SDS protocols. These protocols allow any controller to handle communications between Visualization systems such as Human MAchien Interfaces (HMI), Supervisory Control and Data Acquisition (SCADA), Distributed Control Systems (DCS) and 3rd party software applications. Implementation or Remote I/O systems also uses the same communication protocols, enabling the 90-30 PLC series to maximize I/O capacity and to implement the required automation by the process.

GE Fanuc Series 90-30 is a modular, versatile and scalable PLC Platform. The Controllers are categorized as Entry level Standard Models, Mid-Range Standard Levels and High-Performance Models.

Standard Entry Level models include CPU311, CPU313 and CPU 323 which are embedded into the backplane. CPU 311 supports a total of 160 Discrete I/O, 64 analog input and 32 Analog output with user logic memory of 6Kbytes. CPU313 supports the same I/O capacity however, has an increased memory of 12Kbytes. CPU 323 has a capacity of 320 Discrete I/O, with the same amount of analog I/O and memory size as the CPU 323. 

Standard Mid-range controllers include CPU 331 and CPU 341 which are modular type CPUs. Mid-range CPUs all support 1024 Discrete I/O, with CPU 331 capable up to 128 Analog Input and 64 Analog Output while CPU 341 accommodates 1024 Analog Input and 256 Analog output.

All GE Fanuc 90-30 High-Performance CPUs has a capacity of 4096 Discrete Input and Output, accommodates 2048 Analog Input and 512 Analog output with user logic memory ranging from 32Kbytes - 246Kbytes. 

The GE Fanuc 90-30 PLC Platform includes a wide selection of I/O module types. This PLC Platforms has 38 Discrete I/O modules, 17 Analog I/O modules and wide selection of specialty modules. Specialty modules include High Speed Counter Module, I/O Processor Module, Programmable Coprocessor Module, Temperature Control Module, Servo Motion Control Modules, PC Coprocessor, Thermocouple, Millivolt/Strain Gauge, Sequence of Event (SOE) Recorder, Isolated Analog, and Modem Module.
The GE Fanuc 90-30 PLC Platform has a Four (4) Level password protection, allowing users and machine manufacturers to implement logic security to prevent unwanted access. Each CPU is capable of online programming edits, comprehensive and easy to understand I/O and CPU diagnostics, Embedded Proportional+Integral+Derivative (PID) controller function block, data move instructions, Indirect addressing and other industry useful function blocks and instructions.

The 90-30 PLC Platform are IEC61131-3 compliant controllers. All controllers support a minimum of Ladder Logic and SFC instruction, with the High-Performance CPUs additionally supports C programming language. This controller platform also comes with open-connectivity support, allowing 3rd party devices and software applications to interact with the controller for implementing a plant wide automation and data integration.

The 90-30 PLCs are compatible with GE Logicmaster 90-30, VersaPro Standard Edition and Proficy Machine Edition Programming software packages. 


  • Supports a wide variety of industrial applications
  • Well Defined controller application ranges
  • Redundancy support
  • Wide variety of Input and Output Modules
  • Support for legacy and modern communication protocols
  • Comes in compact and modular form
  • Small-form factor PLC platform
  • Scalable design
  • Coprocessor support
  • Motion control capable


  • No Native support for Ethernet; requires additional communication module
  • Web-server configuration
  • Three (3) programming software packages available, complicates troubleshooting, upgrade and migration
  • Confusing Controller redundancy implementation
  • IoT not ready

5-slot baseplate with embedded CPU, 1K Byte Register Memory use small fraction 9030

Buy Now

5-slot baseplate with embedded CPU, 2K Bytes Register MemoryFirmware for CPUs 9030

Buy Now
IC693CPU32110 SLOT CPU RACK Configuring a model 331 rack size will produce Non-fatal hardware IC6Buy Now

10-Slot Rack With Turbo CPU in base Firmware for these CPUs is in a replaceable EPROM IC

Buy Now
IC693CPU331CPU (16K Bytes) 10 MHz modular CPUs consist of a CPU, memory IC693CPU CompatableBuy Now
IC693CPU340PROCESSOR CPU 80C188XL microprocessor 20 MHz, 32K Bytes User Program IC693CPU 9030Buy Now
IC693CPU341CPU341 module PROCESSOR 20 MHz, 80K Bytes User Program Memory IC693CPU GE FanucBuy Now

CPU 350 25 MHz Complimentary Metal-Oxide Semiconductor Random Access Memory

Buy Now
IC693CPU351CPU 351 Flash Firmware (Standard and User Memory) 25 MHz IC693CPU Compatabe withBuy Now
IC693CPU352CPU 352 Capacities Speed: 25 Processor: 80386EX 25 MHz, math coprocessor IC693CPUBuy Now

CPU 360 Memory: 240K1 Confirgurable All Series CPUs can work with integer numbers

Buy Now

CPU 363 CPU module, 25 MHz, with two extra serial ports 90-30 State Logic CPU IC693CPU

Buy Now
IC693CPU364CPU 364 and Ethernet Interface communicate without using the PLC backplane IC693CPUBuy Now
IC693CPU366GE CPU 366 Module (240K Bytes configurable Supports Profibus DP Master (Version 1 supported). One Profibus port and one RS-232 service port.Buy Now
IC693CPU367CPU 367 Module with PROFIBUS Slave Firmware 90-30 Embedded Interface Series 90-30 CPUBuy Now
IC693CPU370GE CPU Ethernet CPU firmware stored in Flash memory loaded serial port connector IC693CPUBuy Now
IC693CPU372CPU 372 CPU is modular, it can readily be replaced or changed to a different type IC693CPUBuy Now

CPU 374 CPU module, 133 MHz, 240K bytes User Program Memory with Ethernet IC693CPU

Buy Now

PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.