1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

GE Fanuc Emerson | Series 90-30

GE Fanuc Emerson | Series 90-30 | Image click here to request a quote

The GE Series 90-30 PLC was first introduced in 1988. A joint venture then occurred between GE and Fanuc to form GE Fanuc for many years. As that joint ventured dissolved, the Series 90-30 was then sold under the GE Intelligent Platforms name. Recently Emerson Electric...

The GE Series 90-30 PLC was first introduced in 1988. A joint venture then occurred between GE and Fanuc to form GE Fanuc for many years. As that joint ventured dissolved, the Series 90-30 was then sold under the GE Intelligent Platforms name. Recently Emerson Electric purchased the rights of the GE-IP Automation products. The Series 90-30 has a proven track record as a quality and cost effective control system. The powerful IC693CPU374 CPU processor has built-in Ethernet. The IC693PWR330 power supply is required and should be installed in the IC693CHS391 10 slot rack. This system can be configured as a multi-rack system with AC/DC I/O and a wide variety of analog modules. There are two battery types for these systems. The IC693ACC301 and the high capacity IC693ACC302.


Read More >

About GE Fanuc Series 90-30
GE Fanuc Series 90-30 are Programmable Logic Controllers (PLC) from GE. These controllers are designed for use in entry level to large and complex applications, as it can accommodate a minimum of Thirty-Two (32) I/Os up to 4096 I/O capacity.

Series 90-30 supports a wide variety of communication protocols such as Genius Bus, World FIP, Profibus-DP, Interbus-S, LonWorks, DeviceNet, Ethernet or SDS protocols. These protocols allow any controller to handle communications between Visualization systems such as Human MAchien Interfaces (HMI), Supervisory Control and Data Acquisition (SCADA), Distributed Control Systems (DCS) and 3rd party software applications. Implementation or Remote I/O systems also uses the same communication protocols, enabling the 90-30 PLC series to maximize I/O capacity and to implement the required automation by the process.

GE Fanuc Series 90-30 is a modular, versatile and scalable PLC Platform. The Controllers are categorized as Entry level Standard Models, Mid-Range Standard Levels and High-Performance Models.

Standard Entry Level models include CPU311, CPU313 and CPU 323 which are embedded into the backplane. CPU 311 supports a total of 160 Discrete I/O, 64 analog input and 32 Analog output with user logic memory of 6Kbytes. CPU313 supports the same I/O capacity however, has an increased memory of 12Kbytes. CPU 323 has a capacity of 320 Discrete I/O, with the same amount of analog I/O and memory size as the CPU 323. 

Standard Mid-range controllers include CPU 331 and CPU 341 which are modular type CPUs. Mid-range CPUs all support 1024 Discrete I/O, with CPU 331 capable up to 128 Analog Input and 64 Analog Output while CPU 341 accommodates 1024 Analog Input and 256 Analog output.

All GE Fanuc 90-30 High-Performance CPUs has a capacity of 4096 Discrete Input and Output, accommodates 2048 Analog Input and 512 Analog output with user logic memory ranging from 32Kbytes - 246Kbytes. 

The GE Fanuc 90-30 PLC Platform includes a wide selection of I/O module types. This PLC Platforms has 38 Discrete I/O modules, 17 Analog I/O modules and wide selection of specialty modules. Specialty modules include High Speed Counter Module, I/O Processor Module, Programmable Coprocessor Module, Temperature Control Module, Servo Motion Control Modules, PC Coprocessor, Thermocouple, Millivolt/Strain Gauge, Sequence of Event (SOE) Recorder, Isolated Analog, and Modem Module.
The GE Fanuc 90-30 PLC Platform has a Four (4) Level password protection, allowing users and machine manufacturers to implement logic security to prevent unwanted access. Each CPU is capable of online programming edits, comprehensive and easy to understand I/O and CPU diagnostics, Embedded Proportional+Integral+Derivative (PID) controller function block, data move instructions, Indirect addressing and other industry useful function blocks and instructions.

The 90-30 PLC Platform are IEC61131-3 compliant controllers. All controllers support a minimum of Ladder Logic and SFC instruction, with the High-Performance CPUs additionally supports C programming language. This controller platform also comes with open-connectivity support, allowing 3rd party devices and software applications to interact with the controller for implementing a plant wide automation and data integration.

The 90-30 PLCs are compatible with GE Logicmaster 90-30, VersaPro Standard Edition and Proficy Machine Edition Programming software packages. 

PROS:

  • Supports a wide variety of industrial applications
  • Well Defined controller application ranges
  • Redundancy support
  • Wide variety of Input and Output Modules
  • Support for legacy and modern communication protocols
  • Comes in compact and modular form
  • Small-form factor PLC platform
  • Scalable design
  • Coprocessor support
  • Motion control capable

CONS:

  • No Native support for Ethernet; requires additional communication module
  • Web-server configuration
  • Three (3) programming software packages available, complicates troubleshooting, upgrade and migration
  • Confusing Controller redundancy implementation
  • IoT not ready
IC693MDL230

120 volts ac Isolated Input Module Circuitry Terminals Field in PDF 90-30 IC693M IC693MD IC693MDL


Buy Now
IC693MDL231

240 Volts ac Isolated Input 8 Point Common Power Terminal Circuits are Reactive 90-30 IC693


Buy Now
IC693MDL240

120 Volts ac Input Module 120VAC 16 Inputs Optical Coupler Circuitry Wiring IC693 MDL IC693


Buy Now
IC693MDL241

24 Volts ac/Vdc Input Positive/Negative logic Input Module Field Wiring Diagram in PDF IC693


Buy Now
IC693MDL250120 VAC ISOLATED 16 PT INPUT Numbered LEDs show ON/OFF Status of each Input IC693MDLBuy Now
IC693MDL260120VAC 32 PT INPUT Filter Setup in PDF Grouped Input Module 32 Point 120VAC IC693MDLBuy Now
IC693MDL310120 Volts ac Output, 0.5 Amp Connect Supplied Input Devices and Power Sources ModuleBuy Now
IC693MDL330

120/240 Volts ac Output, 2 Amp 8 Point LEDs indicate ON/OFF Module IC693MDL330 IC6


Buy Now
IC693MDL340

120 Volts ac Output, 0.5 Amp GE Fanuc Series 9030 Module IC693 IC693M IC693MD IC693


Buy Now
IC693MDL350120/240 VAC ISOLATED OUTPUT, 2 AMP Module is Compatable with 90-30 Series IC693MDLBuy Now
IC693MDL390

120/240 Volts ac Isolated Output, 2 Amp Load Current vs Temperature Output Module IC69


Buy Now
IC693MDL630Input MDL 24VDC Neg/Pos Logic 8 Pts Input Module 24 VDC Negative/Positive Logic IC693Buy Now
IC693MDL632

125 Volts DC Positive/Negative Logic Input Module Connections are shown in dashed lines


Buy Now
IC693MDL63424 Volts dc Input, Negative/Positive Logic Module is Compatable with 90-30 IC69 IC693MDLBuy Now
IC693MDL64024Vdc Output Positive Logic 16 pts Module is Compatable with 90-30 Series MDL IC693MDLBuy Now
IC693MDL64124 Vdc Output, Negative Logic Module is Compatable with 90-30 Series IC693MD IC693MDLBuy Now
IC693MDL643MDL643 9030 Input Module 24VDC 16 Point Positive 1MS Filter GE Fanuc 90-30 IC693MDL6Buy Now
IC693MDL645

IC693MDL 24 Volts dc Input, Positive/Negative Module Logic Input vs Temperature IC693M


Buy Now
IC693MDL646

24 Volts dc Input, Neg/Pos Logic LEDs Indicate ON/OFF 8 Green Light IC693MD IC693MDL


Buy Now
IC693MDL648

48Volts dc Input, Neg/Pos Logic Module is Compatable with 90-30 Series IC693MD IC693MDL


Buy Now
IC693MDL65324 Volts dc Input, Neg/Pos Logic MODULE Circuitry Connector Terminals IC693MD IC693MDLBuy Now
IC693MDL654

5/12 Volts dc (TTL) Input, Neg/Pos Logic 32 Point Module 5/12 Volt DC IC693MD IC693MDL


Buy Now
IC693MDL655

IC693MDL 24 Volts dc Input, Module Negative/Positive Logic 32 Point IC693MD IC693MDL


Buy Now
IC693MDL660

24VDC Input Module 32 point requires a terminal block IC694TBB032 TBS032 terminal


Buy Now
IC693MDL730

12/24 Volts dc Output, 2 Amp, Positive Logic (8) Point Module 90-30 IC693MD IC693MDL7


Buy Now
IC693MDL73112/24 Volts dc Output, 2 Amp, Negative Logic (8) Point Module for 9030 IC693MD IC693MDLBuy Now
IC693MDL73212/24 Volts dc Output, 0.5 Amp, Positive Logic (8) Point Module 9030 IC693MD IC693MDLBuy Now
IC693MDL73312/24 Volts dc Output, 0.5 Amp, Negative Logic (8) Point Module 9030 IC693MD IC693MDLBuy Now
IC693MDL734125 Volts dc Output, (6) Point Module for Series 9030 GE Fanuc PLC PDF IC693MD IC693MDLBuy Now
IC693MDL740

IC693MDL 12/24 Volts dc Output, 0.5 Amp GE Fanuc PLC Series 90-30 IC693MD IC693MDL


Buy Now
IC693MDL741

12/24 Volts dc Output, 0.5 Amp, Negative Logic (16) point Series 90-30 IC693MD IC693MDL


Buy Now
IC693MDL742

12/24 Volts dc Output, 1 Amp, Positive Logic PLC GE Fanuc Series 90-30 IC693MD IC693MDL


Buy Now
IC693MDL74848Volts DC Output, 0.5 Amps, Positive Logic MDL Module Series 90-30 IC693MD IC693MDLBuy Now
IC693MDL75012/24 Volts dc Output, Negative Logic MDL750 Module Series 90-30 IC693MD IC693MDLBuy Now
IC693MDL75112/24 Volts dc Output, Positive Logic (32) Point MDL751 Module 90-30 IC693MD IC693MDLBuy Now
IC693MDL752

5/12/24 Volts dc (TTL) Output, Neg Logic, (32) Point Module MDL752 IC693MD IC693MDL


Buy Now
IC693MDL753

IC693MDL 12/24 Volts dc Output, Pos Logic (32) Point MDL753 Module IC693MD IC693MDL


Buy Now
IC693MDL754

MDL754 9030 Output Module 12/24VDC for Series 90-30 Systems IC693MDL IC693MDL75


Buy Now
IC693MDL7609030 MDL760 Solenoid Value Out 11 pt. 24VDC Out 5 pt. Series 90-30 GE FANUC PLC IC693MDL IC693MDL7Buy Now
IC693MDL916Output Module Isolated Relay 4 amp 16 point Requiers High Density Terminal Block MDL916Buy Now
IC693MDL930

Soldered InRelay Output, Isolated, 4 Amp Series 90-30 MDL930 Module IC693MD IC693MDL


Buy Now
IC693MDL931Soldered InRelay Output 8 Amp GE Fanuc Series 90-30 MDL931 Module IC693MD IC693MDLBuy Now
IC693MDL940

Relay Output, 2 Amp (16) Point MDL940 Module GE Fanuc Series 90-30 IC693MD IC693MDL


Buy Now
IC693MDR390IC693MDR 24Vdc Input Relay Output (8) Point MDR390 Module 90-30 IC693MD IC693MDRBuy Now

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.