GE / IP FANUC Series 90/30 In Stock
SKU 0 UPC 00
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The IC697ACC624 is a rack fan assembly that offers two fans per assembly with extremely easy installation. The only tool needed for installation is a #2 Phillips head screwdriver. This particular rack fan can be used with either the 5-slot Series 90-70 racks or the 9-slot PACSystems RX7i racks. The IC697ACC624 fan assembly provides added rack cooling for installations that may have heat build-up as an issue.
The low noise level will be a welcome addition to any full assembly as this is accomplished through the use of ball bearings for extended life. Per the manufacturer, it is recommended that the fans be wired to the same source of power as the PLC to ensure the fan is working when the PLC is active. Each of the two fans is wired in parallel through the use of a cable assembly. The cable assembly does come with the kit and plugs into the fan wiring connectors that are located on the back. Stripped ends can be used to connect to either a 120 or 240 VAC power adapter at the user’s choice.
IC697ACC624 is compatible with the following rack types: IC697CHS750, IC697CHS109, and IC698CHS009. If viewing the rack fan assembly from the back, the wiring connector is located on the right hand side of either fan housing. The placement of the fan allows for cool air to flow from the bottom up to keep the entirety of the unit cooler. A minimum of nine inches between racks is required to remove and replace each fan. The filters on the fans can be cleaned or replaced as needed by lifting the tabs located on all four sides of the plastic retainer. Operating temperature for this assembly is between -28 to +60 degrees Celsius.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.