GE / IP FANUC Series 90/30 In Stock
The IC697CHS782 is a 17 slot, rear mount VME integrator rack designed by GE Fanuc. The rack is designed for the IC697 programmable controller that can be used for third party VME modules as well as all IC697 CPU and I/O configurations excluding redundancy applications. When mounting the IC697CHS782 rack, adequate space must be left around the rack to allow for the cooling process of the module. There is a rack fan assembly that is offered for required air cooling.
The IC697CHS782 racks accommodate IC697 high density I/O modules and VME modules, which may have changing methods for connection of field devices. There is a succession of jumper positions located on the backplane that help provide flexibility for the two types of modules to be installed. The VME module types are in single slots, whereas the IC697 modules require two slots. The slots for the IC697 are identified by a number, arrow, and are branded as 1A-9A.
The IC697CHS782 rack mounts in a 10” enclosure intended to accept AC/DC plug in or can operate with an external power supply. A power supply adaptor module is necessary if using external source of power. Power requirements for two racks only need one power supply for many of the applications. The two-rack process using a single power supply can be applied if the second rack only requires +5-volt power of 5.2 amperes. There are interconnections needed that are provided with the use of an extension cable that is available by ordering. The extension cable joins to a 9-pin D type connector via a hole on the rack’s left side, which is located on the backplane. The rail located on the bottom of the rack is used for module shield grounding.
|Module Type:||VME Integrator Rack|
|Mounting Location:||Rear (panel)|
|Number of Slots:||17 Single or 8 Double (plus power supply)|
|Type:||Single Width or Double width|
|Dimensions:||11.15 x 19.00 x 7.5 in. (H x W x D)|
|Internal Power Used:||20 amps @ 5 VDC|
Repair your IC697CHS782
For more information on the IC697CHS782 17 Slot, Rear Mount Rack (VME Integrator Rack) of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.