1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.8/5 Based on 14 ratings.

Rate your purchase of the IC697CHS790
IC697CHS790 In Stock! 17 slot Rack, 9 Slots, Rear Mount IC697C IC697CH IC697CHS PDFsupply also repai

SKU 2170064  UPC 0799705795020


MSRP $1151


  ON SALE ! 

19 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?



Save $956

8 In Stock

✓  2 Year PDF Supply Warranty

*What is Remanufactured?

Product Description

The IC697CHS790 is a 9-slot Rear Mount for IC697 programmable controller used for CPU and I/O configurations.
There is capability for one power supply for the standard 9-slot rack located at the leftmost module position. The IC697CHS790 rack mounts in a 10 inch deep enclosure where fans are not normally required. The rack’s dimensions are 11.15” H x 19” W x 7.5” D with controller slot width being 1.6” W and the width of the supply slot at 2.4” W. Each rack offers a slot sensing for rack-type I/O created for the IC697 PLC. No switches or jumpers on the I/O modules are needed.  

The mounting for the IC697CHS790 rack requires enough space to allow for proper cooling of system modules. The requirements for mounting must be determined according to the application and the proper rack ordered. The mounting flanges are conveniently factory installed in the rack’s side panels.

The IC697 I/O modules interlock by use of a key to avoid unintended interchange of a module type for another module type. Each module includes a key that latches on mechanically to the center rail of the rack, where it stays until the module is removed. If the module is not the correct type, it cannot be inserted into that rack slot. A rack number from 0-7 must be assigned when there are several racks in a system; the CPU rack is always rack 0. The number of each rack will be determined by the PLC from the four jumpers on the rack’s backplane. The backplane location is directly behind the power supply, and the jumpers are on the backplane.  

Technical Specifications

Module Type: Standard Rack
Mounting Location: Rear(panel)
Number of Slots: 9 (plus power supply)
Type: Double width
Dimensions: 11.15 x 19.00 x 7.5 in. (H x W x D)
Internal Power Used:  20 amps @ 5 VDC


Technical Information


Number of Slots

5 or 9, plus power supply slot

Maximum 5 Volt Current

20 amps (100 watt 120/240 VAC or 125 VDC power supply) 11 amps (55 watt 120/240 VAC or 125 VDC power supply) 18 amps (90 watt 24 VDC power supply)

18 amps (90 watt 48 VDC power supply)

Current Required from I/O Bus

0.5 amps

I/O References

User configurable without the use of module jumpers or DIP switches.

Rack Identification

Four jumpers behind rack power supply


Nine Slot Rack

Height Width Depth

11.15” 19.00” 7.5”

283mm 483mm 190mm

Five Slot Rack

11.15” 12.6” 7.5”

283mm 320mm 190mm

All modules for the IC697 I/O system extend 1.7” (43mm) beyond the front of the rack.


System designed to support the VME standard C.1


Troubleshooting IC697CHS790

Troubleshooting information is available on IC697CHS790's website page; it also includes a datasheet user-manual and a wiring diagram.

Repair your IC697CHS790

PDF Supply can repair your IC697CHS790 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

Customer Questions and Answers

  • Question:  What is an IC697CHS790?  Answer:  The IC697CHS790 is a Nine Slot, Rear Mount Rack from the GE Fanuc 90-70 Series.
  • Question:  For what is IC697CHS790 used?   Answer:  This standard rack is used for the IC697 programmable controllers and is used for all CPU and I/O configurations.
  • Question:  How many modules can this rack hold?   Answer:  IC697CHS790 is made to hold a power supply in the leftmost module position and has 9 additional slot locations.
  • Question:  What are the dimensions of IC697CHS790?   Answer:  11.15" H x 19" W x 7.5" D (283mm x 483mm x 190mm)
  • Question:  How wide are the slots?   Answer:  Slots are 1.6" wide except the power supply is 2.4" wide.
  • Question:  What are some of the features of IC697CHS790?   Answer:
    • Accepts all IC697 PLC module types
    • Rear mount racks mount in a 10" (254mm) deep enclosure (fans normally not required)
    • Accepts plug-in AC or DC IC697 power supply
    • Provision for 2 rack operation from single power supply
  • Question:  What should I do if my IC697CHS790 breaks or is not working how it should?   Answer:  Your IC697CHS790 may need repair

For more information on the IC697CHS790 Nine Slot, Rear Mount Rack of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual. 


 Coming Soon...

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.
All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.