GE / IP FANUC Series 90/30 In Stock
SKU 2174323 UPC 0799705795006
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The "LT" Revision is for the PDF Supply Low Temperature Testing Service. PDF Supply warranty will apply. A $150 service charge will be added at checkout.
The IC697CHS791 is a 9-slot, front mount PLC rack in the GE Fanuc series. The IC697CHS791 front mount rack is compatible with all IC697 PLC module types. The IC697CHS791 rack is mounted in a standard 19” rack. This rack is designed for use of the CPU and I/O configurations. All slots on the IC697CHS791 rack are 1.6” wide in exception for the power supply slot, which is 2.4” in width. The IC697CHS791 rack is equipped with slot sensing, which is necessary for rack-type I/O modules created for the IC697 PLC. Rack-type IC697 high density I/O modules are housed in the IC697CHS791’s 9-slot racks. The modules use a wiring terminal board, and each I/O module capacity can be up to 40 AWG wires. The group of wires is driven through the terminal board cavity where a cleat is provided to secure the wires to the terminal board housing.
In the mechanical keying process, to avoid unintended swap of one module type for another, a key is designed for each module type. Once the module is inserted into the IC697CHS791 rack, the key will latch onto the middle rail of the rack where it will stay once the module is removed. The rack slots are designed for the correct module type to be placed in that slot. If the module needs to be moved to another location in the rack, the key can be removed by pushing upward. This will release the latch. When there are several racks in a system, all racks receive a number between 0-7 with the CPU rack always being 0. Four binary -programmed jumpers located on the IC697CHS791 rack’s backplane are the derived point for the PLC determination of the numbers for each rack.
|Module Type:||Standard Rack|
|Mounting Location:||Front (Rack)|
|Number of Slots:||9 (plus power supply)|
|Dimensions:||11.15 x 19.00 x 7.5 in. (H x W x D)|
|Internal Power Used:||20 amps @ 5 VDC|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.