GE / IP FANUC Series 90/30 In Stock
The IC697CMM741 is an ethernet programmable controller in the 90-70 series. The IC697CMM741 controller is a member of the IC651 Factory LAN hardware and software product family. This group offers high performance solutions for interconnecting automation controllers. The IC697CMM741 controller is designed to be plugged into one slot in the IC697 PLC rack. The IC697CMM741 controller allows direct PLC attachment to IEEE 802.3 CSMA/CD LAN. It is equipped with a standard 15-pin AUI port connection and is designed for IC697 controllers. An AUI or transceiver cable can be supplied by the user. It uses a single slot in the PLC rack, and software is easy to load and/or upgrade. Additionally, software is saved through power outages for at least six months.
When installing the IC697CMM741 controller into the PLC rack, power should be turned OFF from the rack. Connect the battery with the front cover front-facing and the hinge to the right. The batter cable’s tab should face away from the board’s surface. Once the battery is connected to one of the connectors, simply press down to lock. Insert the controller into the appropriate slot (generally the first slot to the right of the CPU or the BTM. Do not force the board when locking. It is important to note that the Ethernet controller will not function correctly if there are empty slots to its left. CAUTION: The green ground wire must be securely fastened to the chassis of the rack, and the rack must be grounded to ensure the LAN’s functionality.
Power Consumption (Typical):
Power consumption for the Ethernet Controller includes external RS-232 loads and the external transceiver. The module is powered by the rack. The power supply must provide +12 Vdc.
+5 Vdc +12 Vdc
1.00A 0.5 A
An on-board battery provides backup power (at least 6 months) when power is removed from the CPU rack containing the Ethernet Controller.
Physical Dimensions: Circuit Board:
6.3 x 9.19 inches (160 x 233 mm). Occupies a single slot in an IC697 PLC rack.
The module plugs into the IC697 CPU rack in the first available slot to the right of the CPU or BTM. (Bus Receiver Module if remote rack)
- LED Indicators: MODULE OK, ONLINE, STATUS OK
- Restart pushbutton and Battery connectors - front edge of board behind the hinged door Serial and Transceiver Ports
- Serial Port: 9-pin female, D-connector (to Local GSM)
- Transceiver Port: 15-pin female, D-connector (to Ethernet transceiver cable and network) LAN (to Network GSM and/or IC641-Ethernet Programmer)
IEEE 802.2 Logical Link Control Class I
IEEE 802.3 CSMA/CD Medium Access Control 10Mbps Serial Port: RS-232 DTE, 9600 bps
Transceiver Port: Ethernet, IEEE 802.3 CSMA/CD, Transceiver SQE must be Enabled.
Repair your IC697CMM741
For more information on the IC697CMM741 Ethernet Controller of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.