GE / IP FANUC Series 90/30 In Stock
Call Now
1-800-360-6802
Mon-Fri 8AM-5PM EST
1-919-535-3180
IC697CPM914-GG
MSRP $14995
Product Description
The IC697CPM914 is a GMR Redundant CPU module designed by GE Fanuc for series 90-70. The IC697CPM914 module is compatible with versions MS-DOS programming software versions 4.2 or later. The MS-DOS programming software does not support any new features of the module except for the Additional LD Program Space. To resolve working issues surrounding the MS-DOS, software will return to the 3.70 version, which is in compliance with the programming software.
The IC697CPM914 module is designed with the new sweep mode for Release 6.00 CPUs. Microcycle mode allows the PLC to keep the time interval between I/O scans. For an efficient process of I/O scans, the CPU must know the amount of the sweep to be assigned to the output scan. The time needed for the previous sweep output scan is required under normal operations to help calculate the sweep’s output scan. The Serial Communications feature has operating restrictions. On any sweep, the serial communication can add up to a maximum of 5 milliseconds, and this should be remembered when the watchdog device is set.
The IC697 module is powered by the IC697 PLC rack. It is vital that the rack jumper is charged because the PLC will not identify the rack and may not identify the error. All expansion racks should be powered when the main rack receives power, and if the CPU is operating, expansion racks cannot be powered during processing. A battery is recommended when powering the IC697CPM914 module. The PCM includes a default backplane communication with a maximum value of 5 seconds. Once the request has been sent via the PCM to the IC697 CPU, the timeout is applied by the PCM.
Technical Specifications
| Module Type: | Floating Point CPU |
| Number of Slots: | 1 (Single slot) |
| Memory: | 512K RAM |
| Number of Points: | 2000 Discrete I/O |
| Serial Ports: | One |
| Supports: | IC660/IC661 I/O |
Ethernet TCP/IP - The new Ethernet Global Data (EGD) is designed for applications requiring high-speed networking and coordination. It provides configurable periodic exchanges among networked control nodes, with no programming required. EGD is up to 10 times more efficient on bandwidth than the normal polling system.
Common related search terms: Battery, Configuration, Datasheet, Firmware, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.