GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
IC697CPM924
SKU 2174308 UPC 0799705794948
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
MSRP $16995
Product Description
The GE Fanuc IC697CPM924 is a CPU module with a single slot that allows calculations involving floating point values. The configuration and programming of the module are done using Windows or MS-DOS programming software. This module performs the function of controlling material handling devices, processes, and machines. The rack-mounted backplane facilitates the communication between the option modules and the I/O modules. The input current required by this module is 3.3 A from the 5 V bus.
IC697CPM924 requires an ambient temperature of more than 40 °C and also requires air cooling for regular operation. This module has four green LEDs to show the module’s status. A software password or keyswitch can be used to secure the configuration as well as program data.
IC697CPM924 comes with 1 MB of memory for data as well as program storage. This module also has a flash memory, which allows the user to update firmware without removing the memory device such as EPROM. The lithium battery used in this module retains memory even after removing the power.
Operation of module IC697CPM924 may be controlled by the three position RUN/STOP switch or remotely by an attached programmer and programming software. Program and configuration data can be locked through software passwords or manually by the memory protect keyswitch. When the key is in the protected position, program and configuration data can only be changed by a programmer connected parallel using the Bus Transmitter module). CPU status is indicated by four green LEDs on the front of the module.
Technical Specifications
| Module Type: | Floating Point CPU |
| Number of Slots: | 1 (Single slot) |
| Memory: | 512K RAM |
| Number of Points: | 12K Discrete I/O |
| Serial Ports: | One |
| Supports: | IC660/IC661 I/O and IC697 I/O |
Technical Information
|
Battery Shelf life Memory retention |
10 years at 20o C (68o F) 6 months nominal without applied power. |
|
Current required from 5V bus |
3.3 Amps nominal |
|
Operating Temperature |
0 to 60oC (32oF to 140oF); 70 CFM forced air required 0 to 40oC (32oF to 104oF); without forced air |
|
Time of Day Clock accuracy Elapsed Time Clock (internal timing) accuracy |
" 3.5 seconds per day maximum " .01% maximum |
|
Serial Port RS422/485 compatible |
Programmer Serial Attachment |
|
VME |
System designed to support the VME standard C.1 |
Troubleshooting
Troubleshooting IC697CPM924
Troubleshooting information is available on IC697CPM924's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC697CPM924
PDF Supply can repair your IC697CPM924 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC697CPM924? Answer: The IC697CPM924 is a 64 MHz, 32-Bit, Floating Point Central Processing Unit from the GE Fanuc 90-70 Series.
- Question: If I power up my IC697CPM924 and the OK LED light is not on or is blinking- What does that mean? Answer: It means you have a problem with your processor and won't be able to test it.
- Question: What steps should I take to test my processor? Answer: In Proficy Machine Edition, you should click the lightning bolt to connect and then, using the hand-print, go into online mode. Next, on the top menu bar, click "Target" and go to "Online Commands". In that window, clear the Controller and I/O Fault Table. After, select "Download and Run". When it asks you what you want to build, click "Hardware Configuration and Logic".
- Question: What is the ultimate goal of this test? Answer: The ultimate goal is to get your processor into run mode.
- Question: What else should I test on my IC697CPM924? Answer: You should test the toggle switch and make sure it works. You should also make sure the Memory Protection switch works (an LED will light up to let you know this feature is working).
- Question: What should I do if my IC697CPM924 is giving me problems? Answer: You should leave your IC697CPM924 in run mode, overnight or over a weekend, and check to see if it stays in run-mode. If it stays in run-mode, everything should be good-to-go.
- Question: What should I do if my IC697CPM924 won't stay in run mode? Answer: Your IC697CPM924 may need to be repaired.
For more information on the IC697CPM924 64 MHz, 32-Bit, Floating Point Central Processing Unit of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual.
Common related search terms: Battery, Configuration, Datasheet, Firmware, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
