PDF Electric and Supply

1-800-360-6802
1-919-535-3180
sales@pdfsupply.com

IC697CPU731

Buy NowIC697CPU731
IC697CPU731
IC697CPU731 Wiring

Rated 4.6/5 based on 14 ratings.
  • IC697CPU731
  • IC697CPU731 Wiring

Product Description



GE Fanuc IC697CPU731 is a 12 MHz, 32 Kbyte Central Processing Unit using the 80C186 microprocessor. This CPU’s single slot is located inside the PLC rack. IC697CPU731 uses MS-DOS or Windows programming software (over Ethernet TCP/IP or through the SNP port) for this module to perform proper programming and configuration. There is no provision for jumpers or DIP switches for configuration. At the time of power-up and operation, this CPU performs verification of configuration. The alarm function can report deviations in actual and programmed configuration.

 

Functions of IC697CPU731 include controlling processes, machines, and systems to handle materials in real time. The CPU can support up to 8K analog I/O modules including the discrete and analog module family of IC697. It communicates with smart option modules and I/O using a Standard format of VME C.1. The user can control module operation using three-position operation mode switch or programming software. Three green LEDs are present, which indicate CPU status.

 

The user must properly install the PLC equipment for safe, reliable operation. Before installation of IC697CPU731, the power provided to PLC must be OFF. The user can connect the module and the battery through battery connectors. After diagnostics completion and CPU programming, the user can move the toggle switch to perform the desired operation, and the green LEDs will continue to show the present state of the program. BTM (Bus transmitter module IC697BEM713) provides the high-performance parallel interface. This CPU comes with lithium battery IC697ACC701 for maintenance of data and program memory and calendar clock. 


Technical Specifications


Module Type: Central Processing Unit
Number of Slots: 1 (Single slot)
Current Required:    1.0 Amp
Number of Points: 512 inputs and outputs (any mix)
Serial Ports: One
Supports: IC660/IC661 I/O and IC697 I/O

 

 

GE Fanuc GE Fanuc Series 90-70

SKU 2175445  UPC 0799705794924

Part Number: IC697CPU731 / ic697cpu731
Mfr/Brand Name: GE Automation
Mfr Number: IC697CPU731 / ic697cpu731
Type: 12 MHz, 32 Kbyte Central Processing Unit Module.

Technical Specifications

  • Single slot CPU
  • 512 inputs and outputs (any mix)
  • Up to 8K analog I/O
  • 0.4 microseconds per boolean function
  • Three position operation mode switch
  • Software configuration
Troubleshooting and Product Information for IC697CPU731

Download product information, troubleshooting guides and operation manuals to get your PLC operational.

New IC697CPU731
Price: $2,230
1 In Stock
1 Year PDF Supply Warranty

*Need a Specific Revision?

Surplus New IC697CPU731
Price: $1,750
1 In Stock
3 Year PDF Supply Warranty

*What is Surplus New?

Save
 22%
Reman IC697CPU731
Price: $495
6
In Stock

2 Year PDF Supply Warranty

*What is Remanufactured?

Save
 78%
Repair Your IC697CPU731
Price: $395
1 Year PDF Supply Warranty
Call For Assistance
1-800-360-6802

Other IC697CPU731

Available Revisions:

1C697CPU731 , GEFIC697CPU731 , CIMIC697CPU731

Specifications:

 

Battery Shelf Life

Memory Retention

10 years at 200 C (680 F)

6 months nominal without applied power

Current required from 5V Bus

1.0Amp

Time of Day Clock (internal timing) Accuracy

Elapsed Time Clock

3.5 seconds per day

.01% maximum

Serial Port

RS422 / 485compatible,programmer serialattachment

VME

System designed to support the VME standard C.1

Troubleshooting IC697CPU731

Troubleshooting information is available on IC697CPU731's website page; it also includes a datasheet user-manual and a wiring diagram.


Repair your IC697CPU731

PDF Supply can repair your IC697CPU731 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

Customer Questions and Answers


  • Question:  What is an IC697CPU731?  Answer:  The IC697CPU731 is a 12 MHz, 32 Kbyte Central Processing Unit from the GE Fanuc 90-70 Series. 
  • Question:  What will I need to test my IC697CPU731?  Answer:  You will need your IC697CPU731, a slot rack, and a power supply.
  • Question:  If the top LED is not on or is blinking when I test my processor- What does that mean?  Answer:  It means you definitely have something wrong with your processor.
  • Question:  How do I test the port that is on IC697CPU731?  Answer:  Go into Proficy Machine Edition, clear the controller fault table and/or the I/O fault table- nothing else. Then, click download and run. You want to download hardware, configuration, and logic. The only thing you are trying to do is get the processor into run mode.
  • Question:  What does each LED indicate?  Answer:  The top LED is the OK LED, the middle LED is the run enabled LED, and the bottom LED is the I/O enabled LED. 
  • Question:  What else should I test on IC697CPU731?  Answer:  You should test the toggle switch (that is under the LEDs). This toggle switch turns off the LEDs and you should simply make sure it works by flipping it on and off. 
  • Question:  What if I think there is a problem with my processor?  Answer:  You should leave it in run mode over night or over a weekend to check and see if it will stay in run mode. 
  • Question:  What if my IC697CPU731 won't stay in run mode?  Answer:  Then your IC697CPU731 may need to be repaired

For more information on the IC697CPU731 12 MHz, 32 Kbyte Central Processing Unit of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual. 

 

Need To Order A Specific Revision?

Give us a call at 1-800-360-6802 or 1-919-535-3180.

We can help you with your Revision specific needs.


Free Overnight delivery on orders over $500!

What is New Surplus?

These “New Surplus” units are a great cost saving alternative. This product is sealed in the original manufacturer’s packaging with all sub-assemblies and documentation. May indicate older date code. Comes with a PDF Supply 3-year warranty.


Free Overnight delivery on orders over $500!


What is Surplus New?

Surplus New - New unused and includes all sub-assemblies and documentation. Product may ship in manufacturer or PDF Supply packaging. May indicate older date code. Includes a PDF Supply 3 Year Warranty.


Free Overnight delivery on orders over $500!


What is Reconditioned?

Reconditioned products from PDF Supply are a cost-effective alternative to new and obsoleted PLC products. Every part is reconditioned down to the circuit board level and updated to the latest revision. All parts are thoroughly inspected and hand-cleaned before being functionally tested in a fully configured system.


Our Reconditioned Products always come with a PDF Supply 2-Year Warranty.

Free Overnight delivery on orders over $500!


What is a Verified Substitute?

A verified substitute new product is a "drop in" replacement designed with identical specifications as the OEM product. It will meet all electrical and dimensional charactertics at a substanstially reduced price.


Free Overnight delivery on orders over $500!


Download Lastest Documentation


Please visit this manufacturer's website to download the lastest manuals and datasheets.


Lowest Price Guarantee


We stand behind our prices with a lowest price guarantee. If you find a legacy GE PLC part advertised for less on an authorized GE PLC distributor website, simply contact us and send us a link to the lower advertised price. We will match that price and ship overnight FREE. The item must be in stock, in similar condition and be able to ship same day.

Free Shipping



FREE Overnight Delivery for Continental US orders over $500!

FREE Ground Delivery for Continental US orders under $500!

US orders placed Monday - Friday before 5pm EST will ship same day.

Canada/Mexico orders placed Monday - Friday before 3:30pm EST will ship same day.

International orders will ship the following business day.