GE / IP FANUC Series 90/30 In Stock
SKU 2175041 UPC 0799705794894
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The IC697CPU772 is a single-slot PLC CPU with expandable memory manufactured by GE Automation and Controls. It is capable of controlling industrial machinery and processes in real-time. A backplane mounted to the rack is used to communicate with various I/O modules. The IC697CPU772 has a 12MHz 80C186 microprocessor capable of floating point calculations at speeds of 0.4 microseconds per Boolean function. Up to 8K analog I/O is supported by this device, along with any mixture of 2K inputs and outputs.
Various coprocessor and communications modules are supported by this device in addition to IC697 LAN interface modules, IC660/IC661 bus controller modules, and link interface modules. This device also supports all of the discrete and analog I/O modules from the IC697 family.
The IC697CPU772 is configured and programmed by software running from an attached computer. Configuration via dual inline package switches and jumpers is not required for this device. Programming this device is possible via serial, parallel, or Ethernet connection using either MS-DOS or programs running on Win 95 or Win NT. Setup and configuration for this device is secured with password protection.
To operate the IC697CPU772, use either the three-position switch or an attached computer with the correct software installed. A memory expansion board is required for this device to function. This expansion provides up to 512 kilobytes of data memory. Memory (RAM) is maintained by the battery. The CPU must be initialized by a connected computer before the memory board can be installed.
To install the IC697CPU772, refer to the product’s documentation. Power should be turned off before attempting installation. Put the control switch into the stop position. Install the memory expansion board. Connect the CMOS battery to the device. Insert the device into the first slot of the rack. Restore power to the rack.
|Module Type:||Expandable, Floating Point CPU|
|Number of Slots:||1 (Single slot)|
|Current Required:||1.2 Amps|
|Number of Points:||2K inputs and outputs (any mix)|
|Supports:||IC660/IC661 I/O and IC697 I/O|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.