GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
IC697CPU781-Troubleshoot
SKU 2176436 UPC 0799705792746
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
MSRP $8995
Product Description
The IC697CPU781 is a Programmable Logic Controller CPU that fits into a single rack slot. To communicate with various “smart option” modules, a rack-mounted backplane with several connectors is used. A toggle control switch with three positions or a connected computer with specific software is used to operate this device.
The IC697CPU781 has a 16MHz microprocessor. Boolean functions are calculated every 0.4 microseconds. Up to 8K analog I/O is supported by this device, along with any mixture of 12K inputs and outputs. Several “smart option” modules are supported such as the IC697 series of discrete and analog modules. IC697 LAN modules and bus controllers for IC660 and IC661 modules are also supported.
To store user and configuration information, an expansion board is required. This board supplies up to 512 kilobytes of volatile memory sustained by a CMOS battery and up to 256 kilobytes of non-volatile flash memory (NVRAM). The calendar and clock for this device is also sustained by the CMOS battery.
The IC697CPU781 is programmed with software on a connected computer, not DIP switches or jumpers. Special programs running on certain operating systems such as MS-DOS, Windows 95, and Windows NT are used to program this device. A parallel, serial connection to this attached computer is possible, as is an Ethernet connection. An Ethernet connection will require an Ethernet controller or type 2 Ethernet interface to be installed. Options to protect configuration data and settings include a memory protection switch or a password in the programming software.
Follow the device documentation while attempting installation. Do not attempt installation while rack is powered on. Place the device control switch into the stop position. Turn the memory protection switch to the off position. Connect the memory expansion board to the device. Install the CMOS battery into the appropriate slot on the device. Insert the device into the first available rack slot. Turn the power back on.
Technical Specifications
| Module Type: | Expandable CPU |
| Number of Slots: | 1 (Single slot) |
| Current Required: | 1.6 Amps |
| Number of Points: | 12K inputs and outputs (any mix) |
| Serial Ports: | One |
| Supports: | IC660/IC661 I/O and IC697 I/O |
Common related search terms: Battery, Configuration, Datasheet, Firmware, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
Adding Items to Cart
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.