1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.7/5 Based on 20 ratings.

Rate your purchase of the IC697CPU782

SKU 2172039  UPC 0799705792753


MSRP $8995

PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson

Surplus New


Save $3,007

1 In Stock

✓  3 Year PDF Supply Warranty

*What is Surplus New?

Repair Service


Save $8,000

5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

Product Description

The IC697CPU782 is a Programmable Logic Controller designed to fit into a single rack slot.
It is capable of controlling machinery and material handling systems in real-time. A rack-mounted backplane gives this device the ability to communicate with various I/O modules. To operate and control this device, use the run/stop control switch or a connected computer with the corresponding software. The IC697CPU782 has a 16MHz microprocessor with the ability to perform floating point calculations at performance speeds of 0.4 microseconds. This device can process various mixtures of up to 12K inputs and outputs and 8K analog I/O.


The IC697CPU782 requires a memory expansion board to store user data and program information. This expansion board provides up to 512 KB of volatile memory and 256 KB of flash memory. Volatile memory is maintained by a CMOS RAM battery. To install this expansion board, the CPU must first be initialized by a connected computer. IC697 LAN interface modules, IC660 and IC661 bus controllers, numerous coprocessor modules, various communications modules, and all discrete and analog I/O modules from the IC697 family are compatible with the IC697CPU782.


This device is configured by software running from a programmer computer. DIP switches and jumpers are not necessary for programming. Configuration is possible via serial or parallel interface. An Ethernet connection is also possible if the proper hardware is installed. Either MS-DOS or a Windows 95 and Windows NT computer running appropriate software is needed to program the IC697CPU782. A password protects the configuration settings along with a built-in memory protect key switch.


Detailed instructions for installing the IC697CPU782 can be found in the device manual. Disconnect power from the rack before attempting to install. Set the memory key switch in the off position. The run/stop switch should be in the stop position. Connect the memory expansion board. The CMOS RAM battery can be placed into either connector. Insert the IC697CPU782 into the rack, and power it on.

Technical Specifications

Module Type: Expandable, Floating Point CPU
Number of Slots: 1 (Single slot)
Current Required: 1.6 Amps
Number of Points:   12K inputs and outputs (any mix)
Serial Ports: One
Supports: IC660/IC661 I/O and IC697 I/O



Technical Information




Shelf Life

Memory Retention


10 years at 200 C (680 F)

6 months nominal without applied power

Current required from 5V Bus

1.6 Amps (includes expansion memory)

Time of Day Clock (internal timing) Accuracy Elapsed Time Clock

3.5 seconds per day

.01% maximum

Serial Port

RS422 / 485compatible,Programmer Serial Attachment


System designed to support the VME standard C.1


Troubleshooting IC697CPU782

Troubleshooting information is available on IC697CPU782's website page; it also includes a datasheet user-manual and a wiring diagram.

Repair your IC697CPU782

PDF Supply can repair your IC697CPU782 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

Customer Questions and Answers

  • Question:  What is an IC697CPU782?   Answer:  The IC697CPU782 is a 16 MHz, 32-Bit, Expandable, Floating Point Central Processing Unit from the GE Fanuc 90-70 Series.
  • Question:  What will I need to test my IC697CPU782?  Answer:  You will need your IC697CPU782, a slot rack, and a power supply.
  • Question:  If the top LED is not on or is blinking when I test my processor- What does that mean?  Answer:  It means you definitely have something wrong with your processor.
  • Question:  How do I test the port that is on IC697CPU782?  Answer:  Go into Proficy Machine Edition, clear the controller fault table and/or the I/O fault table- nothing else. Then, click download and run. You want to download hardware, configuration, and logic. The only thing you are trying to do is get the processor into run mode.
  • Question:  What does each LED indicate?  Answer:  The top LED is the OK LED, the middle LED is the run enabled LED, and the bottom LED is the I/O enabled LED. 
  • Question:  What else should I test on IC697CPU782?  Answer:  You should test the toggle switch (that is under the LEDs). This toggle switch turns off the LEDs and you should simply make sure it works by flipping it on and off. 
  • Question:  What if I think there is a problem with my processor?  Answer:  You should leave it in run mode over night or over a weekend to check and see if it will stay in run mode. 
  • Question:  What if my IC697CPU782 won't stay in run mode?  Answer:  Then your IC697CPU782 may need to be repaired

For more information on the IC697CPU782 16 MHz, 32-Bit, Expandable, Floating Point Central Processing Unit of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual. 


ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.
All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.