GE / IP FANUC Series 90/30 In Stock
SKU 2172058 UPC 0799705792784
The GE Fanuc IC697CPX772 is a single-slot CPU with real-time control functions over machines and processes. This module comes with 512 KB of built-in RAM for the storage of user data, including program, configuration, and register data. IC697CPX772 has a non-volatile flash memory of 256 KB and operational memory used to store user data and firmware. The operating conditions for the IC697CPX772 module include an enclosure of minimum size without any air flow into the system. The operating temperature of this module is 50 degrees Celsius. The module is subject to derating if the 100Watt DC/AC supply or 90-Watt DC supply is in use.
IC697CPX772 includes seven green LEDs on its front which indicate the status of the CPU: the position of the toggle switch, memory protection, serial port activity, and the state of the program. A three-position switch (RUN/STOP) is used to control its operations. User data is protected using software passwords. A key switch is used to protect it manually. The end user must carefully install the PLC equipment for safe and proper operation. The module should power up and the top left (OK) LED will blink. When diagnostics have successfully finished, the top left LED will remain ON, and the second (RUN) and third (EN) LEDs will be OFF. The fourth (bottom left) LED (MEM PROTECT) is off if the keyswitch is in the OFF position. The CPU is now ready to be programmed. This module does not require any jumpers or DIP switches for its configuration.
|Module Type:||Central Processing Unit|
|Number of Slots:||1 (Single slot)|
|Current Required:||3.1 Amps|
|Number of Points:||2K inputs and outputs (any mix)|
|Serial Ports:||Three (RS-232 and RS-485)|
|Supports:||IC660/IC661 I/O and IC697 I/O|