GE / IP FANUC Series 90/30 In Stock
SKU 2173338 UPC 0974988978173
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The IC697MDL251 Input Module is designed by GE Fanuc for the series 90-70. The IC697MDL251 module features 16 points, consisting of four isolated groups of four points each. Each group can be used on a different phase of the AC supply due to the groups’ isolation. The IC697MDL251 module is automatically programmed to guarantee replacement with a comparable type in the field. The 16-point module is compatible with a range of input devices that includes pushbuttons, limit and selector switches, and 2- and 3-wire proximity switches. There is a requirement of .35 amps via the 5-volt bus located on the backplane.
Each IC697MDL251 module is equipped with a mechanical key. The key stops any unintended switch of one module for another module in a specified slot. In case of a need to change a module’s location after the key latching process, the key can be removed by pushing it upward to unhook while removing it off the rail. Once the desired location is determined, the key and module can then be reinserted. Wiring for the IC697MDL251 module requires a wire from the power source to the input terminal for each of the four groups. Wire sizes #14 through #22 are acceptable for the detachable field wiring terminal board. The bundle of wires is secured to the terminal board by a cable tie that passes through a cleat, located in the lower corner of the board. When removing the board, power must be off.
|Rated Voltage:||120 volt AC|
|Number of Inputs:||16 Inputs (4 Isolated groups of 4)|
|Input Current:||10 mA|
|Current Required:||0.35 Amps|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.